I think that is a good idea as well. I'll add that and post a new release here in a few minutes. But should it be that late in the document? Wouldn't it be better if it was inserted in between the current section 3 "Requirements" and section 4 "Overview of Finishing", or the current section 4 "Overview of Finishing" and section 5 "Job Template Attributes"?
Smith
> On Nov 9, 2016, at 7:57 AM, Ira McDonald <blueroofmusic at gmail.com> wrote:
>> Hi Mike,
>> I like your suggestion and agree with your initial suggested content.
>> These "Changes Since" sections are important for new readers and
> those who've "been away for awhile."
>> Cheers,
> - Ira
>>> Ira McDonald (Musician / Software Architect)
> Co-Chair - TCG Trusted Mobility Solutions WG
> Chair - Linux Foundation Open Printing WG
> Secretary - IEEE-ISTO Printer Working Group
> Co-Chair - IEEE-ISTO PWG Internet Printing Protocol WG
> IETF Designated Expert - IPP & Printer MIB
> Blue Roof Music / High North Inc
>http://sites.google.com/site/blueroofmusic <http://sites.google.com/site/blueroofmusic>
>http://sites.google.com/site/highnorthinc <http://sites.google.com/site/highnorthinc>
> mailto: blueroofmusic at gmail.com <mailto:blueroofmusic at gmail.com>
> Jan-April: 579 Park Place Saline, MI 48176 734-944-0094
> May-Dec: PO Box 221 Grand Marais, MI 49839 906-494-2434
>>> On Wed, Nov 9, 2016 at 8:29 AM, Michael Sweet <msweet at apple.com <mailto:msweet at apple.com>> wrote:
> All,
>> It occurs to me, after looking at the current stable draft of IPP Finishings 2.1, that we don't have a high-level "Changes" section detailing the changes between published versions of PWG 5100.1 like we do for RFC2910bis and RFC2911bis, and that such a section would help our discussions at the F2F as well as providing useful context for readers once the update is published.
>> Proposed content:
>> 11. Overview of Changes
>> 11.1 Changes in IPP Finishings v2.1
>> The following changes were made for IPP Finishings v2.1:
>> - Added finishing enums and templates for multiple-hole punching and an engineering Z fold.
> - Defined an extension naming convention for the "finishing-template" member attribute.
> - Added the "media-sheets-supported" member attribute for the "finishings-col-database" and "finishings-col-ready" attributes.
> - Added the "stitching-method" member attribute for the "finishings-col", "finishings-col-database", and "finishings-col-ready" attributes.
> - Added the "printer-finisher-supplies" and "printer-finisher-supplies-description" attributes.
>> 11.2 Changes in IPP Finishings v2.0
>> The following changes were made for IPP Finishings v2.0:
>> - Moved definition of PWG 5100.3 "finishings-col" attribute to this document and added new member attributes for all finishings processes.
> - Added finishing enums and templates for coating, lamination, triple stapling, different kinds of punching, and common folds.
> - Added the "finishings-col-database" and "job-pages-per-set" attributes.
> - Added the "media-size" and "media-size-name" member attributes for the "finishings-col-database" and "finishings-col-ready" attributes.
>> _________________________________________________________
> Michael Sweet, Senior Printing System Engineer
>> _______________________________________________
> ipp mailing list
>ipp at pwg.org <mailto:ipp at pwg.org>
>https://www.pwg.org/mailman/listinfo/ipp <https://www.pwg.org/mailman/listinfo/ipp>
>> _______________________________________________
> ipp mailing list
>ipp at pwg.org>https://www.pwg.org/mailman/listinfo/ipp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pwg.org/pipermail/ipp/attachments/20161109/4c9ce268/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4241 bytes
Desc: not available
URL: <http://www.pwg.org/pipermail/ipp/attachments/20161109/4c9ce268/attachment.p7s>