Ira,
Thanks for this.
Based on the spreadsheet, it looks like the make, model, version, and serial number information was rated a C by every person that cast a vote, so I am inclined to limit the base subunit member attributes to:
<subunitname>-info (REQUIRED)
<subunitname>-info-uri (RECOMMENDED)
<subunitname>-name (REQUIRED)
<subunitname>-state (REQUIRED)
<subunitname>-state-reasons (CONDITIONALLY REQUIRED when there are multiple sub-units of a given type, added during the concall)
Plus the following as needed (another common one from the Printer MIB):
<subunitname>-type (REQUIRED)
> On Jan 26, 2016, at 1:42 PM, Ira McDonald <blueroofmusic at gmail.com> wrote:
>> Hi,
>> Links to the Printer MIB objects for DMTF CIM Schema mapping spreadsheet and rationale documents from the WIMS WG in 2006:
>>http://ftp.pwg.org/pub/pwg/wims/cim/PrinterMibObjectsToAdd_conclusions_20060921_F.xls <http://ftp.pwg.org/pub/pwg/wims/cim/PrinterMibObjectsToAdd_conclusions_20060921_F.xls>
>>http://ftp.pwg.org/pub/pwg/wims/cim/PrinterMibObjectsToAdd_conclusions_20060921_F_Rationale.pdf <http://ftp.pwg.org/pub/pwg/wims/cim/PrinterMibObjectsToAdd_conclusions_20060921_F_Rationale.pdf>
>> Useful for the IPP 3D subunit template as well as for general Printer MIB firmware planning.
>> Cheers,
> - Ira
>>> Ira McDonald (Musician / Software Architect)
> Co-Chair - TCG Trusted Mobility Solutions WG
> Chair - Linux Foundation Open Printing WG
> Secretary - IEEE-ISTO Printer Working Group
> Co-Chair - IEEE-ISTO PWG Internet Printing Protocol WG
> IETF Designated Expert - IPP & Printer MIB
> Blue Roof Music / High North Inc
>http://sites.google.com/site/blueroofmusic <http://sites.google.com/site/blueroofmusic>
>http://sites.google.com/site/highnorthinc <http://sites.google.com/site/highnorthinc>
> mailto: blueroofmusic at gmail.com <mailto:blueroofmusic at gmail.com>
> Winter 579 Park Place Saline, MI 48176 734-944-0094
> Summer PO Box 221 Grand Marais, MI 49839 906-494-2434
>>> On Mon, Jan 25, 2016 at 5:18 PM, Michael Sweet <msweet at apple.com <mailto:msweet at apple.com>> wrote:
> To close the loop on this, we decided to drop <subunitname>-security as it is poorly defined, even in the original RFC 3805 text. I will have formal definitions for all 3D sub-units included in the next draft of the IPP 3D spec.
>>> > On Jan 25, 2016, at 3:36 PM, Michael Sweet <msweet at apple.com <mailto:msweet at apple.com>> wrote:
> >
> > [For discussion during today's WG concall]
> >
> > All,
> >
> > One of the decisions at the last 3D concall was to use collections for subunit status information. What follows is a general template for all of these attributes, which we will discuss before I apply it to the various subunit attributes in the current draft.
> >
> > ....
> >
> > "printer-<subunitname>-col (1setOf collection)"
> >
> > This CONDITIONALLY REQUIRED Printer Status attribute provides the status of the <subunitname> sub-units that are managed by the Printer. Printers that support <subunitname> sub-units MUST support this attribute.
> >
> >
> > "<subunitname>-info (text)"
> >
> > This member attribute provides a human-readable description for the sub-unit.
> >
> >
> > "<subunitname>-info-uri (uri)"
> >
> > This member attribute provides a web page for the sub-unit.
> >
> >
> > "<subunitname>-name (name)"
> >
> > This member attribute provides a human-readable name for the sub-unit.
> >
> >
> > "<subunitname>-make-and-model (text)"
> >
> > This member attribute provides a human-readable make and model for the sub-unit.
> >
> >
> > "<subunitname>-security (boolean)"
> >
> > This member attribute indicates whether the sub-unit has some security associated with it.
> >
> >
> > "<subunitname>-serial-number (text)"
> >
> > This member attribute provides a human-readable serial number for the sub-unit.
> >
> >
> > "<subunitname>-state (type1 enum)"
> >
> > This member attribute provides the current state of the sub-unit. Values are:
> >
> > '3' ('idle'): The sub-unit is available and either idle or in standby mode.
> > '4' ('processing'): The sub-unit is available and either active or busy.
> > '5' ('stopped'): The sub-unit is unavailable.
> >
> > Additional information concerning the state can be found in the "printer-state-reasons" Printer Status attribute [RFC2911].
> >
> >
> > "<subunitname>-version (text)"
> >
> > This member attribute provides a human-readable version for the sub-unit.
> >
> >
> > _________________________________________________________
> > Michael Sweet, Senior Printing System Engineer
> >
>> _________________________________________________________
> Michael Sweet, Senior Printing System Engineer
>> _______________________________________________
> ipp mailing list
>ipp at pwg.org <mailto:ipp at pwg.org>
>https://www.pwg.org/mailman/listinfo/ipp <https://www.pwg.org/mailman/listinfo/ipp>
>
_________________________________________________________
Michael Sweet, Senior Printing System Engineer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pwg.org/pipermail/ipp/attachments/20160126/e5202459/attachment.html>