Hi,
Links to the Printer MIB objects for DMTF CIM Schema mapping spreadsheet
and rationale documents from the WIMS WG in 2006:
http://ftp.pwg.org/pub/pwg/wims/cim/PrinterMibObjectsToAdd_conclusions_20060921_F.xlshttp://ftp.pwg.org/pub/pwg/wims/cim/PrinterMibObjectsToAdd_conclusions_20060921_F_Rationale.pdf
Useful for the IPP 3D subunit template as well as for general Printer MIB
firmware planning.
Cheers,
- Ira
Ira McDonald (Musician / Software Architect)
Co-Chair - TCG Trusted Mobility Solutions WG
Chair - Linux Foundation Open Printing WG
Secretary - IEEE-ISTO Printer Working Group
Co-Chair - IEEE-ISTO PWG Internet Printing Protocol WG
IETF Designated Expert - IPP & Printer MIB
Blue Roof Music / High North Inc
http://sites.google.com/site/blueroofmusichttp://sites.google.com/site/highnorthinc
mailto: blueroofmusic at gmail.com
Winter 579 Park Place Saline, MI 48176 734-944-0094
Summer PO Box 221 Grand Marais, MI 49839 906-494-2434
On Mon, Jan 25, 2016 at 5:18 PM, Michael Sweet <msweet at apple.com> wrote:
> To close the loop on this, we decided to drop <subunitname>-security as it
> is poorly defined, even in the original RFC 3805 text. I will have formal
> definitions for all 3D sub-units included in the next draft of the IPP 3D
> spec.
>>> > On Jan 25, 2016, at 3:36 PM, Michael Sweet <msweet at apple.com> wrote:
> >
> > [For discussion during today's WG concall]
> >
> > All,
> >
> > One of the decisions at the last 3D concall was to use collections for
> subunit status information. What follows is a general template for all of
> these attributes, which we will discuss before I apply it to the various
> subunit attributes in the current draft.
> >
> > ....
> >
> > "printer-<subunitname>-col (1setOf collection)"
> >
> > This CONDITIONALLY REQUIRED Printer Status attribute provides the status
> of the <subunitname> sub-units that are managed by the Printer. Printers
> that support <subunitname> sub-units MUST support this attribute.
> >
> >
> > "<subunitname>-info (text)"
> >
> > This member attribute provides a human-readable description for the
> sub-unit.
> >
> >
> > "<subunitname>-info-uri (uri)"
> >
> > This member attribute provides a web page for the sub-unit.
> >
> >
> > "<subunitname>-name (name)"
> >
> > This member attribute provides a human-readable name for the sub-unit.
> >
> >
> > "<subunitname>-make-and-model (text)"
> >
> > This member attribute provides a human-readable make and model for the
> sub-unit.
> >
> >
> > "<subunitname>-security (boolean)"
> >
> > This member attribute indicates whether the sub-unit has some security
> associated with it.
> >
> >
> > "<subunitname>-serial-number (text)"
> >
> > This member attribute provides a human-readable serial number for the
> sub-unit.
> >
> >
> > "<subunitname>-state (type1 enum)"
> >
> > This member attribute provides the current state of the sub-unit. Values
> are:
> >
> > '3' ('idle'): The sub-unit is available and either idle or in standby
> mode.
> > '4' ('processing'): The sub-unit is available and either active or
> busy.
> > '5' ('stopped'): The sub-unit is unavailable.
> >
> > Additional information concerning the state can be found in the
> "printer-state-reasons" Printer Status attribute [RFC2911].
> >
> >
> > "<subunitname>-version (text)"
> >
> > This member attribute provides a human-readable version for the sub-unit.
> >
> >
> > _________________________________________________________
> > Michael Sweet, Senior Printing System Engineer
> >
>> _________________________________________________________
> Michael Sweet, Senior Printing System Engineer
>> _______________________________________________
> ipp mailing list
>ipp at pwg.org>https://www.pwg.org/mailman/listinfo/ipp>-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pwg.org/pipermail/ipp/attachments/20160126/3a6d3d78/attachment.html>