Ira,
The missing elements I referred to were SM Schema elements. It seems to
me the subset of Input Tray/Output Bin elements selected for the IPP
view should also be covered in the PWG SM Schema.
Pete
Peter Zehler
Xerox Research Center Webster
Email: Peter.Zehler at Xerox.com
Voice: (585) 265-8755
FAX: (585) 265-7441
US Mail: Peter Zehler
Xerox Corp.
800 Phillips Rd.
M/S 128-25E
Webster NY, 14580-9701
From: Ira McDonald [mailto:blueroofmusic at gmail.com]
Sent: Wednesday, November 30, 2011 8:04 AM
To: Zehler, Peter; Ira McDonald
Cc: Michael Sweet; ipp at pwg.org
Subject: Re: [IPP] printer-input-tray and printer-output-tray proposals
postedto wiki...
Hi Pete,
There are *lots* of missing elements in these
input and output trays - on purpose - as I said
when I posted them, they follow the WIMS/CIM
mapping rank table from 2006 - low priority
elements were all *intentionally* omitted.
Whereas in the CIM classes, the mapping is
complete - but the CIM Profile would use the
same ranking for conformance (i.e., only
priority 1's would ever be considered for a
REQUIRED in the CIM Profile).
Cheers,
- Ira
Ira McDonald (Musician / Software Architect)
Chair - Linux Foundation Open Printing WG
Secretary - IEEE-ISTO Printer Working Group
Co-Chair - IEEE-ISTO PWG IPP WG
Co-Chair - TCG Trusted Mobility Solutions WG
Chair - TCG Embedded Systems Hardcopy SG
IETF Designated Expert - IPP & Printer MIB
Blue Roof Music/High North Inc
http://sites.google.com/site/blueroofmusic
<http://sites.google.com/site/blueroofmusic>
http://sites.google.com/site/highnorthinc
<http://sites.google.com/site/highnorthinc>
mailto:blueroofmusic at gmail.com
Winter 579 Park Place Saline, MI 48176 734-944-0094
Summer PO Box 221 Grand Marais, MI 49839 906-494-2434
On Wed, Nov 30, 2011 at 7:55 AM, Zehler, Peter <Peter.Zehler at xerox.com>
wrote:
All,
I added the SM keywords to wiki tables. (You can always delete it in
the official specification.) Found a couple missing elements and some
possible modeling issues with Feed & XFeed sizes. Now that the model
has MediaSize (XDimension and YDimension) perhaps that should be used
instead of MediaSizeName in the SM mapping for the MIB. It would line
up better with the proposed IPP mapping as well.
Pete
Peter Zehler
Xerox Research Center Webster
Email: Peter.Zehler at Xerox.com
Voice: (585) 265-8755 <tel:%28585%29%20265-8755>
FAX: (585) 265-7441 <tel:%28585%29%20265-7441>
US Mail: Peter Zehler
Xerox Corp.
800 Phillips Rd.
M/S 128-25E
Webster NY, 14580-9701
-----Original Message-----
From: ipp-bounces at pwg.org [mailto:ipp-bounces at pwg.org] On Behalf Of
Michael Sweet
Sent: Tuesday, November 29, 2011 8:21 PM
To: ipp at pwg.org
Subject: [IPP] printer-input-tray and printer-output-tray proposals
postedto wiki...
All,
I have posted Ira's proposals for printer-input-tray and
printer-output-tray to:
http://pwg-wiki.wikispaces.com/printer-input-trayhttp://pwg-wiki.wikispaces.com/printer-output-tray
For discussion at the F2F...
_________________________________________________________
Michael Sweet, Senior Printing System Engineer, PWG Chair
--
This message has been scanned for viruses and dangerous content by
MailScanner, and is believed to be clean.
_______________________________________________
ipp mailing list
ipp at pwg.orghttps://www.pwg.org/mailman/listinfo/ipp
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
_______________________________________________
ipp mailing list
ipp at pwg.orghttps://www.pwg.org/mailman/listinfo/ipp
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pwg.org/pipermail/ipp/attachments/20111130/0e5b7a6f/attachment-0001.html>