Hi Pete,
There are *lots* of missing elements in these
input and output trays - on purpose - as I said
when I posted them, they follow the WIMS/CIM
mapping rank table from 2006 - low priority
elements were all *intentionally* omitted.
Whereas in the CIM classes, the mapping is
complete - but the CIM Profile would use the
same ranking for conformance (i.e., only
priority 1's would ever be considered for a
REQUIRED in the CIM Profile).
Cheers,
- Ira
Ira McDonald (Musician / Software Architect)
Chair - Linux Foundation Open Printing WG
Secretary - IEEE-ISTO Printer Working Group
Co-Chair - IEEE-ISTO PWG IPP WG
Co-Chair - TCG Trusted Mobility Solutions WG
Chair - TCG Embedded Systems Hardcopy SG
IETF Designated Expert - IPP & Printer MIB
Blue Roof Music/High North Inc
http://sites.google.com/site/blueroofmusichttp://sites.google.com/site/highnorthinc
mailto:blueroofmusic at gmail.com
Winter 579 Park Place Saline, MI 48176 734-944-0094
Summer PO Box 221 Grand Marais, MI 49839 906-494-2434
On Wed, Nov 30, 2011 at 7:55 AM, Zehler, Peter <Peter.Zehler at xerox.com>wrote:
> All,
> I added the SM keywords to wiki tables. (You can always delete it in
> the official specification.) Found a couple missing elements and some
> possible modeling issues with Feed & XFeed sizes. Now that the model
> has MediaSize (XDimension and YDimension) perhaps that should be used
> instead of MediaSizeName in the SM mapping for the MIB. It would line
> up better with the proposed IPP mapping as well.
> Pete
>>> Peter Zehler
>> Xerox Research Center Webster
> Email: Peter.Zehler at Xerox.com> Voice: (585) 265-8755
> FAX: (585) 265-7441
> US Mail: Peter Zehler
> Xerox Corp.
> 800 Phillips Rd.
> M/S 128-25E
> Webster NY, 14580-9701
>> -----Original Message-----
> From: ipp-bounces at pwg.org [mailto:ipp-bounces at pwg.org] On Behalf Of
> Michael Sweet
> Sent: Tuesday, November 29, 2011 8:21 PM
> To: ipp at pwg.org> Subject: [IPP] printer-input-tray and printer-output-tray proposals
> postedto wiki...
>> All,
>> I have posted Ira's proposals for printer-input-tray and
> printer-output-tray to:
>>http://pwg-wiki.wikispaces.com/printer-input-tray>http://pwg-wiki.wikispaces.com/printer-output-tray>> For discussion at the F2F...
>> _________________________________________________________
> Michael Sweet, Senior Printing System Engineer, PWG Chair
>>> --
> This message has been scanned for viruses and dangerous content by
> MailScanner, and is believed to be clean.
>> _______________________________________________
> ipp mailing list
>ipp at pwg.org>https://www.pwg.org/mailman/listinfo/ipp>> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>> _______________________________________________
> ipp mailing list
>ipp at pwg.org>https://www.pwg.org/mailman/listinfo/ipp>
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pwg.org/pipermail/ipp/attachments/20111130/228dc92e/attachment-0001.html>