The Finisher MIB has defined several new enumerations to be added to
the PrtAlertGroupTC and the PrtMarkerSuppliesTypeTC. These are being
added to the Textual Conventions in the Printer MIB, rather than
creating new TCs exclusively for the Finisher MIB, because the
Finisher MIB is defines as an extension of the Printer MIB and these
new enums logically belong within the above named groups.
This announcement is a last call for comments regarding the addition
of these new enumeration values.
All comments should be directed to the PWG-ANNOUNCE mail list.
The last call for comments will close on June 12, 1998.
1. Alert Group enumerations:
PrtAlertGroupTC ::= TEXTUAL-CONVENTION
-- This value is a type 1 enumeration for values in the range
-- 1 to 29.
-- Values of 30 and greater are type 2 enumerations and are
-- for use in other MIBs that augment tables in the Printer
-- MIB. Therefore, other MIBs may assign alert codes of 30 or
-- higher to use the alert table from the Printer MIB without
-- requiring revising and re-publishing this document.
STATUS current
DESCRIPTION
"The type of sub-unit within the printer model that this
alert is related. Input, output, and markers are
examples of printer model groups, i.e., examples of
types of sub-units. Wherever possible, these
enumerations match the sub-identifier that identifies
the relevant table in the printer MIB.
NOTE: Alert type codes have been added for the host
resources MIB storage table and device table. These
additional types are for situations in which the
printer's storage and device objects
must generate alerts (and possibly traps for critical
alerts)."
SYNTAX INTEGER {
other(1),
hostResourcesMIBStorageTable(3),
hostResourcesMIBDeviceTable(4),
generalPrinter(5),
cover(6),
localization(7),
input(8),
output(9),
marker(10),
markerSupplies(11),
markerColorant(12),
mediaPath(13),
channel(14),
interpreter(15),
consoleDisplayBuffer(16),
consoleLights(17),
alert(18),
-- Added values for Finisher MIB
finDevice(30),
finSupply(31),
finSupplyMediaInput(32)
-- End of added values
}
2. Marker Supplies Type enumerations:
PrtMarkerSuppliesTypeTC ::= TEXTUAL-CONVENTION
-- This is a type 3 enumeration
STATUS current
DESCRIPTION
"The type of this supply."
SYNTAX INTEGER {
other(1),
unknown(2),
toner(3),
wasteToner(4),
ink(5),
inkCartridge(6),
inkRibbon(7),
wasteInk(8),
opc(9), --photo conductor
developer(10),
fuserOil(11),
solidWax(12),
ribbonWax(13),
wasteWax(14),
fuser(15),
coronaWire(16),
fuserOilWick(17),
cleanerUnit(18),
fuserCleaningPad(19),
transferUnit(20),
tonerCartridge(21),
fuserOiler(22),
-- Added values for Finisher MIB
water(23),
wasteWater(24),
glueWaterAdditive(25),
wastePaper(26),
bindingSupply(27),
bandingSupply(28),
stitchingWire(29),
shrinkWrap(30),
paperWrap(31),
staples(32),
inserts(33),
covers(34)
-- End of added values
}
----------------------------------------------------
Ron Bergman
Dataproducts Corp.