Ira,
Thanks, "Protective" clearly maps to the existing 'archival' coating types. "Aqueous" would also seem to map to 'archival' unless we feel that it is important to differentiate between "green" and "non-green" coatings in the job ticket?
> On Oct 23, 2014, at 10:32 AM, Ira McDonald <blueroofmusic at gmail.com> wrote:
>> Hi,
>> See good detailed response from Jim Mekis below, as well as Rainer's reply
> already sent to SM3 and IPP mailing lists.
>> Cheers,
> - Ira
>> Ira McDonald (Musician / Software Architect)
> Co-Chair - TCG Trusted Mobility Solutions WG
> Chair - Linux Foundation Open Printing WG
> Secretary - IEEE-ISTO Printer Working Group
> Co-Chair - IEEE-ISTO PWG Internet Printing Protocol WG
> IETF Designated Expert - IPP & Printer MIB
> Blue Roof Music / High North Inc
>http://sites.google.com/site/blueroofmusic>http://sites.google.com/site/highnorthinc> mailto: blueroofmusic at gmail.com> Winter 579 Park Place Saline, MI 48176 734-944-0094
> Summer PO Box 221 Grand Marais, MI 49839 906-494-2434
>>> ---------- Forwarded message ----------
> From: James Mekis <jmekis at mekis.net>
> Date: Thu, Oct 23, 2014 at 2:08 AM
> Subject: Re: Rainer - need definitions of two JDF coating types ASAP
> To: blueroofmusic at gmail.com, Rainer Prosi <Rainer.Prosi at heidelberg.com>
>>> Ira & Rainer -
>> I am not a coatings expert, but here is a short coatings description based
> on my experience. (I am presuming that "Finishings 2.0" is focused on
> post-press operations):
>> The coatings listed in JDF's ColorIntent Resource Table can be applied
> either inline or offline. Offline coatings (finishing) are typically
> intended to be protective. They can increase water-resistance,
> scuff-resistance, and even food resistance in the case of restaurant menus.
> They have been used for decades to protect offset printed sheets, and usage
> has increased with the desire to protect digitally printed sheets,
> especially photo images. Like varnish, they come in gloss & dull variants.
>> The most commonly coating types requested by customers today are UV coatings
> (Ultra Violet cured polymers) which provide higher durability, and aqueous
> coatings that are viewed as "greener" and typically more easily recycled at
> end-of-life. Both types of overall coating protect the printed image as well
> as the substrate. They also may be applied over foil embossed surfaces in
> some instances.
>> Customers may also specify the performance characteristic they desire in the
> coating rather than specifying a coating type. Common examples are
> water-resistance, and rub-resistance. Both characteristics may be required
> at the same time. An example is in the wine industry, where the white wine
> label has to survive transport rubbing, followed by water and rubbing ice
> cubes in a bucket upon serving.
>> Does this help?
>> - Jim
>>> == ==
> Rainer Prosi wrote:
>> > Hi Jim
> > I believe that the definitions were drafted during the printtalk discussions.
> > Could you please help Ira out.
> > Thanks
> > Rainer
> >
> >
> >
> >
> >
> > -------- Original message --------
> > From: Ira McDonald <blueroofmusic at gmail.com>
> > Date: 20/10/2014 23:48 (GMT+01:00)
> > To: ipp at pwg.org,"Semantic Model 3.0 Workgroup discussion list"
> > <sm3 at pwg.org>,"Prosi, Rainer PT-RD3" <Rainer.Prosi at heidelberg.com>,Rick
> > Yardumian <RYardumian at ciis.canon.com>,Ira McDonald <blueroofmusic at gmail.com>
> > Subject: Rainer - need definitions of two JDF coating types ASAP
> >
> >
> > Hi,
> >
> > In our review of PWG Last Call comments today on Finishings 2.0,
> > I got the following action item that I'm passing on to you Rainer:
> >
> > "Action: Ira to ask Rick and Rainer about JDF coating types: "Aqueous"
> > and "Protective"
> >
> > They are not defined in JDF (as far as Mike Sweet could find) and we
> > can't add a keyword to a PWG spec without a clear definition.
> >
> > Cheers,
> > - Ira
> >
> > PS - A reply by the next JDFMAP call next Monday 27 October would
> > be much appreciated - thanks.
> >
> >
> > Ira McDonald (Musician / Software Architect)
> > Co-Chair - TCG Trusted Mobility Solutions WG
> > Chair - Linux Foundation Open Printing WG
> > Secretary - IEEE-ISTO Printer Working Group
> > Co-Chair - IEEE-ISTO PWG Internet Printing Protocol WG
> > IETF Designated Expert - IPP & Printer MIB
> > Blue Roof Music / High North Inc
> > http://sites.google.com/site/blueroofmusic> > http://sites.google.com/site/highnorthinc> > mailto: blueroofmusic at gmail.com<mailto:blueroofmusic at gmail.com>
> > Winter 579 Park Place Saline, MI 48176 734-944-0094
> > Summer PO Box 221 Grand Marais, MI 49839 906-494-2434
> >
> >
> > ________________________________
> >
> > Confidentiality note:
> > The information in this email and any attachment may contain confidential and
> > proprietary information of Heidelberger Druckmaschinen AG and/or its
> > affiliates and may be privileged or otherwise protected from disclosure. If
> > you are not the intended recipient, you are hereby notified that any review,
> > reliance or distribution by others or forwarding without express permission is
> > strictly prohibited and may cause liability. In case you have received this
> > message due to an error in transmission, we kindly ask you to notify the
> > sender immediately and to delete this email and any attachment from your
> > system.
>>> =================
> James Mekis
> (408) 930-5150
>jmekis at Mekis.net> =================
>>>>>
_________________________________________________________
Michael Sweet, Senior Printing System Engineer, PWG Chair