[SM3] JDFMAP call - 10:30pm US Eastern Monday 21 July 2014

[Michael Sweet]

Ira,

FYI, I will not be able to call in for this one...  Will try to call in for the others, but I think we have a pretty good start on the FinishingsCol mappings...


On Jul 19, 2014, at 6:13 PM, Ira McDonald <blueroofmusic at gmail.com> wrote:

> Hello,
> 
> Our next JDFMAP special call will be on Monday 21 July at
> 7:30-8:30 US PDT / 10:30-11:30 US EDT / 16:30-17:30 CEST
> 
> Call-in toll-free number (US/Canada): 1-866-469-3239
> Call-in toll number (US/Canada): 1-650-429-3300 (Primary)
> Call-in toll number (US/Canada): 1-408-856-9570 (Backup)
> Attendee Access Code: *******#
> Attendee ID Code: # (empty)
> 
> NOTE: DO NOT USE the audio bridge number shown by WebEx
> - instead use the regular PWG conference bridge listed above!
> 
> Topic: JDFMAP Discussions
> Date: Every Monday, from Monday, July 21, 2014 to no end date
> Time: 10:30 am, Eastern Daylight Time (New York, GMT-04:00)
> Meeting Number: 683 505 355
> Meeting Password: Printing123
> 
> -------------------------------------------------------
> Meeting information
> -------------------------------------------------------
> 1. Go to
> https://ieee-isto.webex.com/ieee-isto/j.php?MTID=me80ad87529b4ae33f134c1fb19354cd1
> 
> 2. If requested, enter your name and email address.
> 3. If a password is required, enter the meeting password: Printing123
> 4. Click "Join".
> 
> -------------------------------------------------------
> For assistance
> -------------------------------------------------------
> 1. Go to https://ieee-isto.webex.com/ieee-isto/mc
> 2. On the left navigation bar, click "Support".
> 
> Agenda:
> 
> (1) PWG IP Policy and Minute Taker
> - volunteer as minute taker?
> 
> (2) Review latest draft of CIP4 JDF to PWG PJT Mapping
> - ftp://ftp.pwg.org/pub/pwg/sm3/wd/wd-smjdfmap10-20140604-rev.pdf
>  - PDF of revisions with line numbers
> 
> - ftp://ftp.pwg.org/pub/pwg/sm3/wd/wd-smjdfmap10-20140604-rev.docx
>  - MS Word source of revisions with line numbers
> 
> Rainer - *please* do any updates with "Track Changes" enabled
> *in*
> *the MS Word source* (with a changed date suffix in filename), both
> new revisions and new comments, and send to Rick & Ira - thank you!
> 
> (3) Review Mike Sweet's Finishings mappings
> - http://ftp.pwg.org/pub/pwg/ipp/minutes/ippv2-concall-minutes-20140616.pdf
> - see below for Mike's original Finishings mappings proposal
> 
> (4) Next steps
> - JDFMAP special call on Monday 28 July
> - SM WG session at PWG F2F on Wednesday 13 August
> - JDFMAP special call on Monday 18 August
> 
> Cheers,
> - Ira and Rick (co-editors of JDFMAP spec)
> 
> -----------------------------------------------
> 
> - Mike's original Finishings mappings proposal on Monday 9 June
> 
>    Bailing -> Wrapping/WrappingParams
>        BailingType -> /@WrappingKind
>        BailingWhen (no mapping)
> 
>    Binding -> AdhesiveBinding, ChannelBinding, CoilBinding,
> EndSheetGluing, LongitudinalRibbonOperations, RingBinding, StripBinding, or
> WireCombBinding
>        BindingReferenceEdge -> /*Params/HoldMakingParams/@HoldReferenceEdge
>        BindingType -> determines which class (we'll need to break this out
> for each type)
> 
>    Coating -> no mapping?
>        CoatingSides
>        CoatingType
> 
>    Covering -> CoverApplication
>        CoveringName -> /Component(Cover)
> 
>    Folding -> Folding/Fold
>        FoldingDirection -> /@To
>        FoldingOffset -> /@Travel
>        FoldingReferenceEdge -> /@From   (this will require some
> calculation since all folds are from the top or left in JDF)
> 
>    Laminating -> Laminating
>        LaminatingSides -> /Component/@Side
>        LaminatingType -> /@Media
> 
>    Punching -> HoleMaking/HoleMakingParams
>        PunchingLocations /@Hole
>        PunchingOffset /@Center
>        PunchingReferenceEdge /@HoleReferenceEdge
> 
>    Trimming -> Cutting/Cut or Perforating/
>        TrimmingOffset -> /@StartPosition
>        TrimmingReferenceEdge /@WorkingPath
>        TrimmingType /@CutWidth (not sure)
>        TrimmingWhen (no mapping)
> _______________________________________________
> sm3 mailing list
> sm3 at pwg.org
> https://www.pwg.org/mailman/listinfo/sm3

_________________________________________________________
Michael Sweet, Senior Printing System Engineer, PWG Chair