Greetings,
HP Inc. requests the registration of 5 IPP attributes defined in the "Wi-Fi Peer-to-Peer Services Print (P2Ps-Print) Technical Specification v1.1" relating to the PCLm document format definition therein. The "Wi-Fi Peer-to-Peer Services Print (P2Ps-Print) Technical Specification v1.1" is one of the files in the "Wi-Fi Peer-to-Peer Services Technical Specification Package v1.2" available here: https://www.wi-fi.org/file/wi-fi-peer-to-peer-services-technical-specification-package-v12
These are the attributes to be registered with accompanying section numbers from the source specification where they were defined:
Job Template Attributes:
---------------------------------
3.12.4 pclm-raster-back-side (keyword)
This Job Template attribute specifies the bitmap coordinate system for
the back side of duplex sheets and the following keyword values are
defined:
+---------+------------------+-------------------+
| KEYWORD | LONG EDGE ORIGIN | SHORT EDGE ORIGIN |
+---------+------------------+-------------------+
| Normal | top-left | top-left |
| Rotated | bottom-right | top-left |
| Flipped | bottom-left | top-right |
+---------+------------------+-------------------+
3.12.8 pclm-source-resolution (resolution)
This attribute specifies the source resolution of the current job.
Resolution is specified in dots-per-inch.
Printer Description Attributes
---------------------------------
3.12.9 pclm-source-resolution-supported (1setOf resolution)
This attribute enumerates the printer’s supported source resolutions
(specific to PCLm). Specifies the resolution or range of source
resolutions supported by the printer. The return value(s) shall be in
dots-per-inch. Typically, a printer will produce better resolution and
perform better when the source and printer resolution are equal.
3.12.10 pclm-strip-height-preferred (integer)
This attribute specifies the preferred strip height for the printer for
jobs that have PCLm document format.
3.12.11 pclm-strip-height-supported (1setOf integer)
This attribute specifies the strip/swath height that the printer
requires. If non-zero, the Strip Height shall be a power of 2 and shall
not be less than 16. The strip height is specified in source space
coordinates. This attribute is only required for PCLm jobs. Strip height
is relative to page i.e. if 16 means strip height is = page length/16.
A return value of 0 indicates that the entire page should be delivered to
the printer as a single strip, e.g. strip height is equal to the page
height, resulting in a strip count of 1.
The default for a printer shall be 16.
Cheers,
Smith
/**
Smith Kennedy
Wireless & Standards Architect - IPG-PPS
Standards - IEEE ISTO PWG / Bluetooth SIG / Wi-Fi Alliance / NFC Forum / USB-IF
Chair, IEEE ISTO Printer Working Group
HP Inc.
*/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4241 bytes
Desc: not available
URL: <http://www.pwg.org/pipermail/ipp/attachments/20180828/113d9f91/attachment.p7s>