Hi Rick,
No - because the related spec is supposed to get an errata update
(warnings and errors have to be treated differently in IPP than in
the Printer MIB - also there were some missing codes/keywords).
This is the *first* on deck errata spec for Q2 2017 work by me (and
Mike Sweet or Smith Kennedy as sanity check co-editor). I need
to convert to Mike's current PWG spec template as well (bunch of
cut-and-paste).
I have been driving to a mostly complete Prototype version of IPP
System Service (so Mike can prototype w/ "ippserver" source)
before taking up another IPP spec. Chrysler 3 days/week and
six public standards bodies have rather overloaded me this year.
Cheers,
- Ira
Ira McDonald (Musician / Software Architect)
Co-Chair - TCG Trusted Mobility Solutions WG
Chair - Linux Foundation Open Printing WG
Secretary - IEEE-ISTO Printer Working Group
Co-Chair - IEEE-ISTO PWG Internet Printing Protocol WG
IETF Designated Expert - IPP & Printer MIB
Blue Roof Music / High North Inc
http://sites.google.com/site/blueroofmusichttp://sites.google.com/site/highnorthinc
mailto: blueroofmusic at gmail.com
Jan-April: 579 Park Place Saline, MI 48176 734-944-0094
May-Dec: PO Box 221 Grand Marais, MI 49839 906-494-2434
On Tue, May 2, 2017 at 2:39 PM, Yardumian, Rick <RYardumian at ciis.canon.com>
wrote:
> Hi Ira,
>>>> Have the IANA registrations been completed yet?
>>>> Thanks,
>> Rick
>>>> *From:* Ira McDonald [mailto:blueroofmusic at gmail.com]
> *Sent:* Wednesday, November 16, 2016 6:36 AM
> *To:* Yardumian, Rick; ipp at pwg.org; Ira McDonald
> *Cc:* Kennedy, Smith (Wireless Architect) <smith.kennedy at hp.com> (
>smith.kennedy at hp.com); Michael Sweet (msweet at apple.com)
> *Subject:* Re: Canon question about missing IANA registrations regarding
> "Printer MIB and IPP MFD Alerts" specs
>>>> Hi Rick,
>> Mea culpa.
>> MFD Alerts was published the same month that I left Samsung and
>> I went straight to another high-pressure client and project and just
>> plain forgot to IANA register the Printer MIB updates.
>> There is also a pending errata update against this document for the
>> correct use of "-error" and "-warning" suffixes (i.e., should use them
>> in IPP, but I will *remove* them from the Printer MIB enums, since
> the separate prtAlertSeverityLevel object should be used there).
>>>> The update to MFD Alerts is the highest priority editing task that I'll
>> start on in January 2017. It also needs to be poured into the new
>> PWG document template. Mike Sweet will help me with editorial
>> problems and the update to the very large IANA Considerations
>> section.
>> Cheers,
>> - Ira
>>> Ira McDonald (Musician / Software Architect)
> Co-Chair - TCG Trusted Mobility Solutions WG
> Chair - Linux Foundation Open Printing WG
> Secretary - IEEE-ISTO Printer Working Group
> Co-Chair - IEEE-ISTO PWG Internet Printing Protocol WG
> IETF Designated Expert - IPP & Printer MIB
> Blue Roof Music / High North Inc
>http://sites.google.com/site/blueroofmusic>http://sites.google.com/site/highnorthinc> mailto: blueroofmusic at gmail.com> Jan-April: 579 Park Place Saline, MI 48176 734-944-0094
> <(734)%20944-0094>
> May-Dec: PO Box 221 Grand Marais, MI 49839 906-494-2434
> <(906)%20494-2434>
>>>> On Tue, Nov 15, 2016 at 3:43 PM, Yardumian, Rick <
>RYardumian at ciis.canon.com> wrote:
>> Hi Smith,
>> I got a request from Canon Japan about the Printer MIB and IPP MFD Alerts.
> I copied Mike and Ira in case they have a quick answer.
>> 1st question is regarding the following documents;
>https://ftp.pwg.org/pub/pwg/candidates/cs-pmpmfdalerts10-> 20120629-5107.3.pdf
> Printer MIB and IPP MFD Alerts (MFD Alerts)
> Status: Approved
> 29 June 2012 Candidate Standard
>> In section "5.2 MFD and Printer Extension Subunit Alerts", it notes that
> "The new MFD and Printer extension subunit alerts and the associated alert
> values are defined in this section for registration in PrtAlertCodeTC in
> IANA Printer MIB [IANAPRT]."
>> However, on the "https://www.ietf.org/assignments/ianaprinter-mib/> ianaprinter-mib", Canon could not find additional registration for the
> above spec.
>> Based on the above situation, Canon thinks;
> - "ianaprinter-mib" has not been updated yet.
> - However, the "Printer MIB and IPP MFD Alerts" have been approved.
>> Is Canon's understanding correct?
>>> And regarding the section "5.2 MFD and Printer Extension Subunit Alerts",
> Canon thinks;
> - "Table 2 MFD and Printer Subunit Alerts" is correct.
> - "Table 3 IPP printer-state-reasons" and "9.2 Alert Codes" are incorrect
> (missing assignment)
>> Is Canon's understanding correct?
>> Thanks for looking into this.
>> Best regards,
> Rick
>>>-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pwg.org/pipermail/ipp/attachments/20170502/23ee2e0e/attachment.html>