Greetings again,
I have reposted it with one small change:
> * make the resolution either use "short-edge-feed" or to change the media
> source to 'tray-1' (usually a manual feed input source, at least on HP
> printers) where the user might be instructed via a prompt to provide the
> needed media size and feed orientation.
Now the "job-resolvers-supported" example lists 'manual' as an alternate "media-source". As it was before the end of the day, I didn't roll the release date.
Smith
/**
Smith Kennedy
Wireless Architect - Client Software - IPG-PPS
Standards - IEEE ISTO PWG / Bluetooth SIG / Wi-Fi Alliance / NFC Forum / USB IF
Chair, IEEE ISTO Printer Working Group
HP Inc.
*/
> On Oct 4, 2016, at 12:33 PM, Kennedy, Smith (Wireless Architect) <smith.kennedy at hp.com> wrote:
>> Greetings,
>> I have just posted another new draft of IPP Finishings 2.1:
>>http://ftp.pwg.org/pub/pwg/ipp/wd/wd-ippfinishings21-20161004.pdf>http://ftp.pwg.org/pub/pwg/ipp/wd/wd-ippfinishings21-20161004.docx>http://ftp.pwg.org/pub/pwg/ipp/wd/wd-ippfinishings21-20161004-rev.pdf>http://ftp.pwg.org/pub/pwg/ipp/wd/wd-ippfinishings21-20161004-rev.docx>> Changes include:
>> * In section 5.3 , enhanced definition of "job-pages-per-set" to clarify that
> the value needs to be an exact multiple of the number of pages in all
> Documents in the Job, which also clarifies the expectations of how that
> attribute value is set in the case of a multiple document Job.
>> * Modified the "job-constraints-supported" attribute example at the end of
> section 6.9:
>> * Removed mention of "media-source"='tray-2' because the input source doesn't
> matter.
>> * Added a second value to "finishings" and "finishing-template" so that the
> example illustrates that attributes in a constraint can have more than one
> value even when the attribute itself is defined to have only one value. Also
> called this out with an additional sentence below the example.
>> * Moved open curly braces to the same line as the equal sign to reduce number
> of lines used
>> * Modified the "job-resolvers-supported" attribute example at the end of section
> 6.9:
>> * make the resolution either use "short-edge-feed" or to change the media
> source to 'tray-1' (usually a manual feed input source, at least on HP
> printers) where the user might be instructed via a prompt to provide the
> needed media size and feed orientation.
>> * Moved open curly braces to the same line as the equal sign to reduce number
> of lines used
>> * Removed mention of alternate stitching angles because they don't resolve the
> problem
>> Cheers,
>> Smith
>> /**
> Smith Kennedy
> Wireless Architect - Client Software - IPG-PPS
> Standards - IEEE ISTO PWG / Bluetooth SIG / Wi-Fi Alliance / NFC Forum / USB IF
> Chair, IEEE ISTO Printer Working Group
> HP Inc.
> */
>>>> _______________________________________________
> ipp mailing list
>ipp at pwg.org>https://www.pwg.org/mailman/listinfo/ipp
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4956 bytes
Desc: not available
URL: <http://www.pwg.org/pipermail/ipp/attachments/20161005/cf6a9aad/attachment.p7s>