Hi Mike,
Yesterday in the IPP WG meeting I agreed to work up sequence diagrams that will hopefully paint the picture more clearly than my slide set. I'll model the "job-constraints-supported" approach as well as the approach we have considered thus far that uses additions to finishings-col and/or media-col. I'm not married to any particular solution, just to finding an appropriate way to support these limitations.
Smith
> On 2016-05-24, at 10:00 AM, Michael Sweet <msweet at apple.com> wrote:
>> Smith,
>> Would using "job-constraints-supported" to list the exceptions to "finishings-col-database/ready" be a better match than specifying the feed orientation? That way we are still tying the constraint to the media size/source without exposing the lower-level processing details, and the "job-resolvers-supported" attribute can provide a recommended change, e.g., use tray 2 instead of tray 3.
>>>> On May 23, 2016, at 3:13 PM, Kennedy, Smith (Wireless Architect) <smith.kennedy at hp.com> wrote:
>>>> Greetings,
>>>> This revision of the slide set is now on the FTP site here:
>>>>http://ftp.pwg.org/pub/pwg/ipp/slides/Finishings-2.1-Orientation-and-Feed-Orientation-Extensions-2016-05-17.pdf>>>> Smith
>>>> /**
>> Smith Kennedy
>> Wireless Architect - Client Software - IPG-PPS
>> Standards - IEEE ISTO PWG / Bluetooth SIG / Wi-Fi Alliance / NFC Forum / USB IF
>> PWG Chair
>> HP Inc.
>> */
>>>>>>>>>>>>> On 2016-05-17, at 6:16 AM, Kennedy, Smith (Wireless Architect) <smith.kennedy at hp.com> wrote:
>>>>>> Greetings,
>>>>>> Attached is an updated slide set as per the last IPP WG meeting. Please review before next meeting and reply with feedback via email if possible if there are any glaring issues with the way that I've encoded things. This is a complex problem, which would benefit from broad review.
>>>>>> Cheers,
>>>>>> Smith
>>>>>>>>>>>>> On 2016-04-28, at 10:24 AM, Kennedy, Smith (Wireless Architect) <smith.kennedy at hp.com> wrote:
>>>>>>>> Greetings,
>>>>>>>> I have posted a brief slide set that I will use later today to try to illustrate issue I think needs to be addressed in Finishings 2.1, that concerns managing finishings options based on job orientation and/or feed orientation. It is here:
>>>>>>>>http://ftp.pwg.org/pub/pwg/ipp/slides/Finishings-2.1-Orientation-and-Feed-Orientation-Extensions.pdf>>>>>>>> I've also updated the meeting page to list this slide deck.
>>>>>>>> Cheers,
>>>>>>>> Smith
>>>>>>>>>> <Finishings-2.1-Orientation-and-Feed-Orientation-Extensions-2016-05-17.pdf>_______________________________________________
>>> ipp mailing list
>>>ipp at pwg.org>>>https://www.pwg.org/mailman/listinfo/ipp>>>> _______________________________________________
>> ipp mailing list
>>ipp at pwg.org>>https://www.pwg.org/mailman/listinfo/ipp>> _________________________________________________________
> Michael Sweet, Senior Printing System Engineer
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4956 bytes
Desc: not available
URL: <http://www.pwg.org/pipermail/ipp/attachments/20160524/9f36430a/attachment.p7s>