Hi Tom et al,
My two cents - use the short checklist for Prototype
experience - level of detail is quite sufficient.
Cheers,
- Ira (IPP co-editor)
Ira McDonald (Musician / Software Architect)
Chair - Linux Foundation Open Printing WG
Co-Chair - TCG Hardcopy WG
IETF Designated Expert - IPP & Printer MIB
Blue Roof Music/High North Inc
email: blueroofmusic at gmail.com
winter:
579 Park Place Saline, MI 48176
734-944-0094
summer:
PO Box 221 Grand Marais, MI 49839
906-494-2434
On Tue, Jan 26, 2010 at 1:29 AM, Tom Hastings <tom.hastings at verizon.net> wrote:
> I uploaded a two-page Prototyping template for vendors to fill in which
> attributes and operations they implemented in the IPP Job and Printer
> Operations Set2 (JPS2) spec to a new folder that I created:
>>>>ftp://ftp.pwg.org/pub/pwg/ipp/prototyping/JPS2-prototyping-template-from-Intro-Tables.doc>>>> We would like to have these templates filled out and posted to the new
>ftp://ftp.pwg.org/pub/pwg/ipp/prototyping/ directory by vendors before the
> face to face meeting, Feb 10, so that we can progress the IPP Job and
> Printer Operations Set2 (JPS2) spec if there is sufficient prototyping
> experiences.
>>>> Here are the instructions (also in the file):
>>>> Vendor Name: <to be filled in>
>> This document is for vendors to indicate their prototyping experience with
> the operations and attributes defined in the Draft Standard for Internet
> Printing Protocol (IPP): Job and Printer Extensions - Set 2 (JPS2) document
> which is in the Call for Prototyping status.
>> Instructions: Please indicate the vendor name above. Please indicate the
> vendor name and indicate in the last column of Table 1 and Table 2 (taken
> from Section 1 of JPS2) the following:
>> P - Read the spec and have implemented it (in a prototype or released
> product).
>> R - Read and understood the spec with the intent to implement.
>> blank - have not implemented
>> Please also indicate any issues with the specification that need
> clarification or change in Table 3.
>>>>>> Since Table 1 and Table 2 do NOT include the values, I also uploaded a
> six-page second template from the IANA section:
>>>>ftp://ftp.pwg.org/pub/pwg/ipp/prototyping/JPS2-prototyping-template-from-Intro-Tables.doc>>>> Here are the instructions (also in the file):
>>>> Vendor Name: <to be filled in>
>> This document is for vendors to indicate their prototyping experience with
> the operations and attributes defined in the Draft Standard for Internet
> Printing Protocol (IPP): Job and Printer Extensions - Set 2 (JPS2) document
> which is in the Call for Prototyping status.
>>>> Instructions: Please indicate the vendor name above. Please indicate in the
> last column of Table 1 through Table 7 (taken from Section 12 IANA
> Considerations of JPS2) the following:
>> P - Read the spec and have implemented it (in a prototype or released
> product).
>> R - Read and understood the spec with the intent to implement.
>> blank - have not implemented
>> Please also indicate any issues with the specification that need
> clarification or change in Table 8.
>>>> We need to quickly agree as to which template we want to use. The first one
> is much simpler and only two-pages long. It lists just the attributes and
> operations. For Job Template attributes it only lists the “xxx”, not the
> “xxx-default” and “xxx-supported”. If that is sufficient, we should use
> just that.
>>>> If more detail is desired, such as every attribute and each of the values,
> then we should use only the more detailed six-page second template.
>>>> Tom
>>>> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
> _______________________________________________
> ipp mailing list
>ipp at pwg.org>https://www.pwg.org/mailman/listinfo/ipp>>
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.