From: Wijnen, Bert (Bert) (bwijnen@lucent.com)
Date: Fri May 23 2003 - 17:55:25 EDT
Hi all... not sure where Ira retrieved the "announcement" from.
But for all I know, the documents are on the IESG agenda for
coming Thursday and Have NOT yet been approved.
So pls excercise a bot more patience.
Sorry to spoil the party.
Thanks,
Bert Wijnen, co-AD for the IETF Operations and Management Area
> -----Original Message-----
> From: McDonald, Ira [mailto:imcdonald@sharplabs.com]
> Sent: vrijdag 23 mei 2003 22:37
> To: pwg-announce@pwg.org
> Cc: raycasterline@lhsolutions.com; 'gary@gocek.org';
> 'rturner@2wire.com'
> Subject: PWG-ANNOUNCE> IESG approved Printer MIB v2 and
> Finisher MIB for
> RFCs
>
>
> Hi folks, Friday
> (23 May 2003)
>
> Great news!
>
> After seven years of effort, the IESG has approved the Printer MIB v2
> (Proposed Standard), Finisher MIB (Informational), and IANA
> Charset MIB
> (Informational).
>
> Copies of the IESG approval notes to the RFC Editor are appended below
> (copied from the IETF Data Tracker search engine).
>
> Thanks to the MIB experts, Bert Wijnen (IETF Ops & Mgmt Area
> Director),
> Dave Harrington, and Juergen Schoenwaelder, for significant technical
> improvements and clarifications to these MIBs over the last two years.
> Thanks to Ned Freed (IETF Applications Area Director) for shepherding
> these MIBs through the recent IETF 'last call'.
>
> Thanks to Ron Bergman (Hitachi) and Harry Lewis (IBM) for their years
> of patient effort as principal editors. Thanks also to Ray Casterline
> (Lighthouse Solutions), Gary Gocek (Veramark), and Randy
> Turner (2wire)
> for their significant contributions in the past as
> co-editors. Lastly,
> thanks to all the many PWG members who contributed so much over the
> years to the Printer MIB v2 and Finisher MIB. Well done!
>
> Cheers,
> - Ira McDonald, co-editor of Printer MIB v2 and Finisher MIB
> High North Inc
>
>
> PS - Next steps - The RFC Editor will (in several months)
> work on these
> MIBs. At that time, the current MIB editors will be contacted for a
> final review for typographic or formatting errors. There is a good
> chance that these MIBs will be published as RFCs before the end of
> calendar 2003!
>
> PPS - So it turns out that the XML Schema translations of these MIBs
> that I posted yesterday (part of the PWG WBMM project) are in
> fact based
> on the final form of the MIBs. Good timing, huh?
>
>
> --------------------------------------------------------------
> ----------
> To: IETF-Announce:;
> Dcc: *******
> Cc: RFC Editor <rfc-editor@isi.edu>,
> Internet Architecture Board <iab@iab.org>,
> From: The IESG <iesg-secretary@ietf.org>
> Subject: Protocol Action: Printer MIB v2 to Proposed Standard
> -------------
>
> The IESG has approved the Internet-Draft 'Printer MIB v2'
> <draft-ietf-printmib-mib-info-15.txt> as a Proposed Standard.
> This has been reviewed in the IETF but is not the product of an IETF
> Working Group. The IESG contact persons are Ned Freed and Ted Hardie.
>
> Technical Summary
>
> This document provides definitions of models and
> manageable objects
> for printing environments. The objects included in this
> MIB apply to
> physical, as well as logical entities within a printing
> device. This
> document obsoletes RFC 1759.
>
> The task of managing the production of printed documents
> can be divided
> into two overlapping pieces, the management of printing and the
> management of the printer. Printing encompasses the
> entire process of
> producing a printed document from generation of the file to be
> printed, selection of a printer, choosing printing properties,
> routing, queuing, resource management, scheduling, and
> final printing
> including notifying the user. Most of the printing process is
> outside the scope of the model presented here; only the
> management of
> the printer itself is covered in this document.
>
> Working Group Summary
>
> This document was reviewed by the Internet Print Protocol
> Working Group
> but is not a product of that group.
>
> Protocol Quality
>
> Bert Wijnen and Ned Freed reviewed the document for the IESG.
>
> --------------------------------------------------------------
> ----------
> To: IETF-Announce:;
> Dcc: *******
> Cc: RFC Editor <rfc-editor@isi.edu>,
> Internet Architecture Board <iab@iab.org>,
> From: The IESG <iesg-secretary@ietf.org>
> Subject: Document Action: Printer Finishing MIB to Informational
> -------------
>
> The IESG has approved the Internet-Draft 'Printer Finishing MIB'
> <draft-ietf-printmib-finishing-16.txt> as an Informational RFC.
> This has been reviewed in the IETF but is not the product of an IETF
> Working Group. The IESG contact persons are Ned Freed and Ted Hardie.
>
> Technical Summary
>
> This document defines a MIB module for the management of printer
> finishing device subunits. The finishing device subunits applicable
> to this MIB are an integral part of the Printer System. This MIB
> does not apply to a Finisher Device that is not connected to a
> Printer System.
>
> Working Group Summary
>
> This document was reviewed by the Internet Print Protocol
> Working Group
> but is not a product of that group.
>
> Protocol Quality
>
> Bert Wijnen and Ned Freed reviewed the document for the IESG.
>
> --------------------------------------------------------------
> ----------
> To: IETF-Announce:;
> Dcc: *******
> Cc: RFC Editor <rfc-editor@isi.edu>,
> Internet Architecture Board <iab@iab.org>,
> From: The IESG <iesg-secretary@ietf.org>
> Subject: Document Action: IANA Charset MIB to Informational
> -------------
>
> The IESG has approved the Internet-Draft 'IANA Charset MIB'
> <draft-mcdonald-iana-charset-mib-02.txt> as an Informational RFC.
> This has been reviewed in the IETF but is not the product of an IETF
> Working Group. The IESG contact persons are Ned Freed and Ted Hardie.
>
> Technical Summary
>
> This memo defines a portion of the Management
> Information Base (MIB)
> for use with network management protocols in the
> Internet community.
> This IANA Charset MIB is [intended to become] an IANA
> registry. In
> particular, a single textual convention 'IANACharset'
> is defined that
> may be used to specify charset labels in MIB objects.
> 'IANACharset'
> was extracted from Printer MIB v2 (work-in-progress).
> 'IANACharset'
> was originally defined (and mis-named) as
> 'CodedCharSet' in Printer
> MIB v1 (RFC 1759). A tool has been written in C, that
> may be used by
> IANA to regenerate this IANA Charset MIB, when future
> charsets are in
> accordance with the IANA Charset Registration
> Procedures (RFC 2978).
>
> Working Group Summary
>
> This document was reviewed by the Internet Print Protocol
> Working Group
> but is not a product of that group.
>
> Protocol Quality
>
> Bert Wijnen and Ned Freed reviewed the document for the IESG.
>
> RFC Editor Note
>
> The copyright notice in the MIB module does not conform to the
> recently-adopted format for IANA-maintained MIB modules. The notice
> in the DESCRIPTION clause of the MODULE-IDENTITY statement needs to
> be changed from:
>
> Copyright (C) The Internet Society (year). This
> version of this MIB module is part of RFC xxxx;
> see the RFC itself for full legal notices."
>
> to:
>
> Copyright (C) The Internet Society (year). The
> initial version of this MIB module was published
> in RFC xxxx. For full legal notices see the RFC
> itself or see: http://www.ietf.org/copyrights/ianamib.html"
>
> --------------------------------------------------------------
> ----------
>
This archive was generated by hypermail 2.1.4 : Thu Apr 16 2009 - 10:55:40 EDT