Hi folks,
FYI - note from Bert Wijnen (IETF Ops Area Director) replying to
Ron Bergman's ping on Printer MIB v2 status.
We'll keep you posted.
Cheers,
- Ira McDonald, co-editor of Printer MIB v2
High North Inc
-----Original Message-----
From: Wijnen, Bert (Bert) [mailto:bwijnen@lucent.com]
Sent: Wednesday, February 20, 2002 10:13 AM
To: Ron.Bergman@Hitachi-hkis.com; bwijnen@lucent.com;
schoenw@ibr.cs.tu-bs.de; dbh@enterasys.com
Cc: harryl@us.ibm.com; imcdonald@sharplabs.com;
RayCasterline@lhsolutions.com
Subject: RE: Response to Printer MIB Comments of 15 Nov, 2001
Sorry to say... but I have so much on my plate that some things
are taking longer (in fact too long).
Thanks for the ping
Bert
> -----Original Message-----
> From: Ron.Bergman@Hitachi-hkis.com
> [mailto:Ron.Bergman@Hitachi-hkis.com]
> Sent: Wednesday, February 20, 2002 3:37 AM
> To: bwijnen@lucent.com; schoenw@ibr.cs.tu-bs.de; dbh@enterasys.com
> Cc: harryl@us.ibm.com; imcdonald@sharplabs.com;
> RayCasterline@lhsolutions.com
> Subject: RE: Response to Printer MIB Comments of 15 Nov, 2001
>
>
> Any progress on the review of the Printer MIB?
>
> Ron Bergman
>
> -----Original Message-----
> From: Wijnen, Bert (Bert) [mailto:bwijnen@lucent.com]
> Sent: Wednesday, January 16, 2002 9:41 AM
> To: Ron.Bergman@Hitachi-hkis.com; bwijnen@lucent.com
> Cc: schoenw@ibr.cs.tu-bs.de; dbh@enterasys.com; pmp@pwg.org;
> IMcDonald@crt.xerox.com; harryl@us.ibm.com;
> RCasterline@lhsolutions.com;
> paf@cisco.com
> Subject: RE: Response to Printer MIB Comments of 15 Nov, 2001
>
>
> Thanks Ron, we'll start looking at it again.
>
> Bert
>
> > -----Original Message-----
> > From: Ron.Bergman@Hitachi-hkis.com
> > [mailto:Ron.Bergman@Hitachi-hkis.com]
> > Sent: Wednesday, January 16, 2002 4:50 PM
> > To: bwijnen@lucent.com
> > Cc: schoenw@ibr.cs.tu-bs.de; dbh@enterasys.com; pmp@pwg.org;
> > IMcDonald@crt.xerox.com; harryl@us.ibm.com;
> > RCasterline@lhsolutions.com;
> > paf@cisco.com
> > Subject: RE: Response to Printer MIB Comments of 15 Nov, 2001
> >
> >
> > Bert,
> >
> > The corrected Printer MIB ID (with page breaks) is now
> > available (finally!)
> > at the IETF internet-drafts site. The version is still -11.
> >
> > http://www.ietf.org/internet-drafts/draft-ietf-printmib-mib-in
> > fo-11.txt
> >
> > Ron Bergman
> > Hitachi Koki Imaging Solutions
>
This archive was generated by hypermail 2b29 : Wed Feb 20 2002 - 16:18:50 EST