PMP Mail Archive: PMP> The Input Switching Group

PMP> The Input Switching Group

Lloyd Young (lpyoung@lexmark.com)
25 Feb 97 10:14:11 EST

Following is the wording proposed by Bob Pentecost in his last e-mail
and there has not been any discussion after his posting. I am going to
take silence as a vote that this wording is acceptable to everyone.

-- The Input Switching Group

--
-- The input switching group allows the administrator to set the
-- input subunit timeout for the printer and to control the automatic
-- input subunit switching by the printer when an input subunit becomes
-- empty.

--
-- This group is optional. However, to claim conformance to this group,
-- it is required to implement every object in the group.


prtInputMediaLoadTimeout OBJECT-TYPE
     SYNTAX          Integer32
     MAX-ACCESS     read-write
     MIN-ACCESS     read-only
     STATUS          current
     DESCRIPTION
          "When the printer is not able to print due to a subunit being
          empty or the requested media must be manually loaded, the printer 
          will wait for the duration (in seconds) specified by this object. 
          Upon expiration of the timeout, the printer will take the action
          specified by prtInputNextIndex.


          The event which causes the printer to enter the waiting state
          is product specific. If the printer is not waiting for manually
          fed media, it may switch from an empty subunit to a different
          subunit without waiting for the timeout to expire.


          A value of (-1) implies 'other' or
          'infinite' which translates to 'wait forever'. The action which
          causes printing to continue is product specific.
          A value of (-2) implies 'unknown'."
::= { prtInputEntry 24 }


prtInputNextIndex OBJECT-TYPE
     SYNTAX          Integer32
     MAX-ACCESS     read-write
     MIN-ACCESS     read-only
     STATUS          current
     DESCRIPTION
          "The value of prtInputIndex corresponding to the input subunit
           which will be used when this input subunit is emptied and the
           timeout specified by prtInputMediaLoadTimeout expires. A value
           of zero(0) indicates that auto input switching will not occur
           when this input subunit is emptied. If the timeout specified by
           prtInputLoadMediaTimeout expires and this value is zero(0), the
           job will be aborted."
::= { prtInputEntry 26 }