Ron,
Don was the person that brought up the point of clarification about how to
represent a dimension that was less than 1 at Portland which I captured in
the minutes. Otherwise, there could be two forms:
0.nnn
.nnn
I agree that less than 1 inch (and less than 1 mm) is hardly useful, but we
should cover that case, especially, for the custom case. And more
importantly, we certainly don't want to allow other leading zeros though,
such as 08.5x011in
The whole idea is that a recipient just does a string match to recognize a
name, not a conversion to numbers and a compare. So names have a canonical
syntax for all values.
Tom
-----Original Message-----
From: Bergman, Ron [mailto:Ron.Bergman@Hitachi-hkis.com]
Sent: Thursday, May 03, 2001 18:19
To: 'Hastings, Tom N'; ipp (E-mail)
Subject: RE: IPP> How does this ABNF look for the Media Size Self
Describi ng Name?
Tom,
It is hard to imagine a doument less than an inch wide let alone less than a
millimeter wide. Maybe in a special label printer, but is this class of
device going to make use of this standard? Most printers would have many
such labels on a single sheet. But as long as a description of this
situation is not required, it can remain in the ABNF.
Also, in response to Don Wright's email, I have proposed that the "x" be
changed to a "-".
Ron
-----Original Message-----
From: Hastings, Tom N [mailto:hastings@cp10.es.xerox.com]
Sent: Thursday, May 03, 2001 3:22 PM
To: ipp (E-mail)
Subject: IPP> How does this ABNF look for the Media Size Self Describing
Name?
How does this ABNF look for the Media Size Self Describing Name?
We agreed in Portland that if a size was ever smaller than an inch or a mm,
the it would have a single zero for the integer part. Otherwise, the
integer part is without leading zeros. Also the fraction part, if present,
has no trailing zeros. I left the prefix as a separate token because we
probably want to mention it in the text as a separate section:
5.1.1 prefix This string part is present to indicate the name space or
jurisdiction for the size name in order to prevent name clashes. Examples
include "na" for North America, "iso" for the International Standards
Organization, etc.
Thanks,
Tom
media-size-self-describing-name = size-name "_" short-dim "x" long-dim
units
size-name = prefix "-" lowalpha *( lowalpha | digit | "-" )
prefix = lowalpha *lowalpha
short-dim = dim
long-dim = dim
units = "in" | "mm"
dim = integer-part [fraction-part] | "0" fraction-part
integer-part = non-zero-digit *digit
fraction-part = "." *digit non-zero-digit
lowalpha = "a" | "b" | "c" | "d" | "e" | "f" | "g" | "h" | "i" |
"j" | "k" | "l" | "m" | "n" | "o" | "p" | "q" | "r" |
"s" | "t" | "u" | "v" | "w" | "x" | "y" | "z"
non-zero-digit = "1" | "2" | "3" | "4" | "5" | "6" | "7" | "8" | "9"
digit = "0" | "1" | "2" | "3" | "4" | "5" | "6" | "7" | "8" | "9"
This archive was generated by hypermail 2b29 : Fri May 04 2001 - 15:09:23 EDT