These changes have been made and will appear in Revision 0.13 of IPPFAX.
Thanks Tom.
-Rick
> -----Original Message-----
> From: owner-ifx@pwg.org [mailto:owner-ifx@pwg.org] On Behalf
> Of Hastings, Tom N
> Sent: Thursday, November 07, 2002 7:13 PM
> To: Gail Songer; Seeler, Rick
> Cc: ifx@pwg.org
> Subject: RE: IFX> A new revision of the IPPFax specification
> is ready [minor comments]
> Importance: High
>
>
> Gail and Rick,
>
> Here are some minor comments on the Draft 12:
>
> 1. The new paragraph added to section 6 is good to have:
>
> "A Sender MUST NOT use any OPTIONAL feature in PDFax unless
> it first queries the Receiver to confirm that the Receiver
> supports the feature. If the feature is not supported in the
> Receiver then the Sender MUST NOT use the OPTIONAL feature. A
> Sender MUST NOT use any feature that is prohibited in PDFax
> [ifx-pdfax] specification."
>
> 1a. However, it would be better to put it in the Conformance
> Section 15 or somewhere else. The conformance section 15
> needs to make reference to it.
>
> 1b. Section 1.1, point number 1 isn't as strong as your new paragraph:
>
> "1. Get-Printer-Attributes - Sender MUST verify that the
> Printer object is an (IPPFAX) Receiver and SHOULD determine
> some of the Receiver's basic capabilities, such as PDFax
> profiles supported."
>
> This paragraph only says SHOULD, but paragraph 2:
>
> "2. Validate-Job - Sender MUST verify that the Receiver can
> support the Job attributes that the Sender will send in the
> IPPFAX Job."
>
> requires that the Sender do a Validate-Job in order to ensure
> that unsupported attributes are not being submitted.
>
>
> 2. The keywords in the new table 5 and 6 need to be made all
> lower case and use hyphens between words to follow IPP keyword rules.
>
> I'll try calling in during the 1-3 PM CST time as well.
>
> Thanks for setting up the call-in.
>
> Tom
>
>
>
> -----Original Message-----
> From: Gail Songer [mailto:gsonger@peerless.com]
> Sent: Thursday, October 24, 2002 11:08
> To: ifx@pwg.org
> Subject: IFX> A new revision of the IPPFax specification is ready.
>
>
>
> The corresponding changes to the ifx-spec are now available:
>
> ftp://ftp.pwg.org/pub/pwg/QUALDOCS/ifx-spec-12-rev.pdf
> ftp://ftp.pwg.org/pub/pwg/QUALDOCS/ifx-spec-12-rev.doc
>
>
> Gail
>
>
>
> |---------+---------------------------->
> | | "Rick Seeler" |
> | | <rseeler@adobe.co|
> | | m> |
> | | Sent by: |
> | | owner-ifx@pwg.org|
> | | |
> | | |
> | | 10/23/2002 10:59 |
> | | AM |
> | | |
> |---------+---------------------------->
>
> >-------------------------------------------------------------
> ----------
> >----
> ---------------------------------------------------|
> |
> |
> | To: <ifx@pwg.org>
> |
> | cc:
> |
> | Subject: IFX> A new revision of the PDFax
> specification is ready.
> |
>
> >-------------------------------------------------------------
> ----------
> >----
> ---------------------------------------------------|
>
>
>
>
> IPPFAX people,
>
> Here is revision 0.2 of the PDFax specification. This will
> be the revision that we will review in New Orleans next
> month. Please note the 'issues' with PDFax in section 5 of
> this document, they will be discussed in New Orleans.
>
ftp://pwg.org/pub/pwg/QUALDOCS/pdfax-spec-02.pdf
For the version noting the changes from 0.1 --
ftp://pwg.org/pub/pwg/QUALDOCS/pdfax-spec-02-rev.pdf
Thanks for everyone's help.
-Rick Seeler
-Adobe Systems
This archive was generated by hypermail 2b29 : Tue Nov 12 2002 - 15:20:25 EST