Perhaps everything needs to be included in the spec (all the GETs, SETs,
etc of all the objects) but compliance subsets defined for specific
purposes.
**********************************************
Don Wright don at lexmark.com
Chair, IEEE SA Standards Board
Member, IEEE-ISTO Board of Directors
f.wright at ieee.org / f.wright at computer.org
Director, Alliances & Standards
Lexmark International
740 New Circle Rd
Lexington, Ky 40550
859-825-4808 (phone) 603-963-8352 (fax)
**********************************************
"Wagner,William" <WWagner at NetSilicon.com>@pwg.org on 07/24/2003 03:04:12 PM
Sent by: owner-wbmm at pwg.org
To: "Harry Lewis" <harryl at us.ibm.com>
cc: "TAYLOR,BOB (HP-Vancouver,ex1)" <bobt at hp.com>, "McDonald, Ira"
<imcdonald at sharplabs.com>, <wbmm at pwg.org>
Subject: RE: WBMM> Queues
Harry,
One of the most immediate applications of WBMM, for which no standard
capability now exists, is in remote monitoring. In general, any set
operation (and many get operations) must be disallowed for enterprise
security and confidentiality purposes. If one is producing proxy devices
to support such a capability (as NetSilicon is), it would be absurd to
require support of operations that could never be used. Now, it is not
clear how important full compliance to a PWG spec is, but if
compliance requires supporting a whole set of unusable operations, it will
become meaningless.
I also have suggested partitioning this effort, although not along the
same lines. I think we should encourage more discussion on this,
particularly on who plans to apply what part of this capability first
rather than what appears easier to do first. Indeed, since prototypes are
a necessary part of the standard development, I think getting volunteers
to apply these ideas may be the determining factor in the "subsetting"
definition and order.
Bill Wagner
-----Original Message-----
From: Harry Lewis [mailto:harryl at us.ibm.com]
Sent: Thursday, July 24, 2003 1:39 PM
To: Wagner,William
Cc: TAYLOR,BOB (HP-Vancouver,ex1); McDonald, Ira; wbmm at pwg.org
Subject: RE: WBMM> Queues
Ouch! disallow SETs?
I agree (propose) with the concept of subsetting. I am thinking more along
the lines of a "growth path"... where we start with Extranet as target and
possibly limit our scope to devices, then move to include Intranet and also
expand to services, then, finally include queues
But I think SET capability is needed, even at the lowest compliance level.
If not, how, for example, would a remote manager take a device off-line
should this be necessary... or post a message to the opPanel?
----------------------------------------------
Harry Lewis
Chairman - IEEE-ISTO Printer Working Group
http://www.pwg.org
IBM Printing Systems
http://www.ibm.com/printers
303-924-5337
----------------------------------------------
"Wagner,William" <WWagner at NetSilicon.com>
Sent by: owner-wbmm at pwg.org
07/24/2003 11:30 AM
To
"TAYLOR,BOB (HP-Vancouver,ex1)" <bobt at hp.com>, "McDonald, Ira"
<imcdonald at sharplabs.com>, Harry Lewis/Boulder/IBM at IBMUS, <wbmm at pwg.org>
cc
Subject
RE: WBMM> Queues
Harry had brought up the notion of different classes of compliance in his
last minutes. I think this is as it must go. For WBMM monitoring
applications, any set operation let alone queue management must be
disallowed. But that does not mean that we ought not identify and format
set operations.
Bill Wagner
-----Original Message-----
From: TAYLOR,BOB (HP-Vancouver,ex1) [mailto:bobt at hp.com]
Sent: Thursday, July 24, 2003 12:55 PM
To: 'McDonald, Ira'; 'Harry Lewis'; wbmm at pwg.org
Subject: RE: WBMM> Queues
I do think doing some sub-setting makes sense - in the case of queues, not
all devices/services managed by WBMM will have queues to manage.
Once we understand the potential subsets, we can talk about which ones need
to be in WBMM 1.0, and which can follow (or potentially be done in
parallel.
bt
> -----Original Message-----
> From: McDonald, Ira [mailto:imcdonald at sharplabs.com]
> Sent: Thursday, July 24, 2003 9:44 AM
> To: 'Harry Lewis'; wbmm at pwg.org> Subject: RE: WBMM> Queues
>>> Hi Harry,
>> Apparently we want to focus on WBMM device management first
> (per most of our WBMM discussions).
>> However, that doesn't do PSI any particular good, which still
> would require the box labelled "and then a miracle happens"
> to get a PSI Print Service (or Target Device) installed or
> reconfigured after installation.
>> Do we care that all PSI implementations will ship without
> standards-based management for several more years?
>> Cheers,
> - Ira McDonald
> High North Inc
>>> -----Original Message-----
> From: Harry Lewis [mailto:harryl at us.ibm.com]
> Sent: Wednesday, July 23, 2003 11:38 PM
> To: wbmm at pwg.org> Subject: WBMM> Queues
>>>> Sorry I missed the call. On the topic of queue management.
> I've no objection to adding this but wonder if it might
> warrant some subsetting of WBMM. Are you going to have to be
> able to manage queues to be WBMM compliant? Don't we want to
> focus on solving the device management problem first, and
> then move on to queue management?
> ----------------------------------------------
> Harry Lewis
> Chairman - IEEE-ISTO Printer Working Group
>http://www.pwg.org> IBM Printing Systems
>http://www.ibm.com/printers> 303-924-5337
> ----------------------------------------------
>
(See attached file: C.htm)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.pwg.org/archives/wims/attachments/20030724/2dbbe612/C.htm