Mike,
The ppmPortName object may contain a maximum of 127 characters.
Does this meet your requirement?
Ron
-----Original Message-----
From: Mike Fenelon [mailto:mfenelon at windows.microsoft.com]
Sent: Thursday, April 21, 2005 9:59 AM
To: Bergman, Ron; McDonald, Ira; Paul Danbold
Cc: pmp at pwg.org; Harry Lewis (E-mail); Ivan Pavicevic
Subject: RE: Adding ppmPortDescription to Port Mon MIB
The intent of this object is to give a short, concise user-friendly name of the port. It will be presented in the User Interface for and device that advertises more than one port so the user can pick the correct port for their connected printer. The whole intent was to differentiate between multiple ports on a device that could host multiple printers. I am concerned we will start degrading the user experience if we add a whole bunch of ports for the same printer with slightly different names.
Mike Fenelon
Microsoft
_____
From: Bergman, Ron [mailto:Ron.Bergman at rpsa.ricoh.com]
Sent: Thursday, April 21, 2005 9:32 AM
To: McDonald, Ira; Paul Danbold
Cc: pmp at pwg.org; Harry Lewis (E-mail); Mike Fenelon; Ivan Pavicevic
Subject: RE: Adding ppmPortDescription to Port Mon MIB
Ira,
I would like to hear from Mike or Ivan on this subject, rather than rely on memory.
Your comment does not agree with the current description clause for this object.
Ron
-----Original Message-----
From: McDonald, Ira [mailto:imcdonald at sharplabs.com]
Sent: Thursday, April 21, 2005 8:37 AM
To: 'Paul Danbold'; Bergman, Ron
Cc: pmp at pwg.org; Harry Lewis (E-mail); McDonald, Ira; MFenelon at microsoft.com; IvanP at microsoft.com
Subject: RE: Adding ppmPortDescription to Port Mon MIB
Hi Ron,
Doesn't work - MS specifically said that they wanted PortName restricted
to a _name_ that they will display in their tools and do NOT want it to
include descriptive text. Your memory is incorrect.
Cheers,
- Ira
Ira McDonald (Musician / Software Architect)
Blue Roof Music / High North Inc
PO Box 221 Grand Marais, MI 49839
phone: +1-906-494-2434
email: imcdonald at sharplabs.com
-----Original Message-----
From: Paul Danbold [mailto:danbold at apple.com]
Sent: Wednesday, April 20, 2005 11:55 PM
To: Bergman, Ron
Cc: pmp at pwg.org; Harry Lewis (E-mail); Ira McDonald (E-mail 3); MFenelon at microsoft.com; IvanP at microsoft.com
Subject: Re: Adding ppmPortDescription to Port Mon MIB
Ron,
Thanks for the clarification. In the expectation that manufacturers will initialize ppmPortName with helpful information, I am satisfied there is no need to add an additional object.
-Paul
---------------------------------------------------------------
Paul Danbold
Imaging Technologies Evangelist, Apple Worldwide Developer Relations
3 Infinite Loop, MS:303-2TE, Cupertino, CA 95014
408-974-0050 (office) 408-425-3351 (mobile)
---------------------------------------------------------------
On Apr 15, 2005, at 9:48 AM, Bergman, Ron wrote:
I remembered this morning why we decided, several months back, to remove this object.
Since the MIB contained both a desciptive name and a description, it was agreed that
the two objects were redundant. To clarify this situation I recommend that the object
ppmPortName be changed to ppmPortDescriptiveName or ppmPortDescription, rather
than go back to the original redundant pair.
ppPortName is a natural language string with up to 127 characters. For Paul Danbold's
example I could provide a name such as:
"Networked LPR port providing binary PostScript printing for use by marketing"
This is less than 80 characters and should be more than sufficient to satisfy Paul's
requirement.
Also, in addition to a possible name change, it must be noted that this object is
expected to be administratively configured using an out-of-band method.
Paul, please indicate if this is sufficient.
Ron Bergman
Ricoh Printing Systems America
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.pwg.org/archives/pmp/attachments/20050421/78c7a339/attachment-0001.html