We are seeking compromise, here. I am opening the call window because of
the amount of progress that has been made on the Port MIB recently and the
goal to move it formal approval in a timely fashion. On balance, Epson has
been very gracious - already, incurring expenses related to hosting. While
it may seem small, I will not ask Epson to foot the bill for an extended
international phone conference in addition.
We will limit this call to 2 hrs. It will begin Wednesday 9pm PDT
(Thursday 1pm in Tokyo).
Dial In: 1-866-365-4406
Toll #: 1-303-248-9655
Passcode: 2635888#
NOTE: If Tokyo is not on line within 15 min of start, consider that there
was technical difficulty and the call was aborted.
NOTE: These arrangements are pending final approval by our host - Epson.
----------------------------------------------
Harry Lewis
IBM STSM
Chairman - IEEE-ISTO Printer Working Group
http://www.pwg.org
IBM Printing Systems
http://www.ibm.com/printers
303-924-5337
----------------------------------------------
"Mike Fenelon" <mfenelon at windows.microsoft.com>
Sent by: pmp-owner at pwg.org
04/12/2005 02:19 PM
To
"McDonald, Ira" <imcdonald at sharplabs.com>, Harry Lewis/Boulder/IBM at IBMUS,
<pmp at pwg.org>
cc
Subject
PMP> RE: [Urgent] Time of Tokyo Port MIB meeting/conf call??
Even with the late hour I want to call in.. I also talked to Ira and he
wants to call also. Could you please setup a the phone bridge so we can
participate??
Mike Fenelon
Microsoft
From: McDonald, Ira [mailto:imcdonald at sharplabs.com]
Sent: Tuesday, April 12, 2005 10:27 AM
To: Mike Fenelon; McDonald, Ira; Harry Lewis; 'pmp at pwg.org'
Subject: RE: [Urgent] Time of Tokyo Port MIB meeting/conf call??
Hi Mike,
I just looked up time deltas between US and Japan this week.
Meeting times would be:
Thursday 1pm to 5pm - Tokyo - Port Mon MIB review, then MIB certification
topic
Thursday 12am to 4am - US Eastern Daylight Time
Wednesday 9pm to Thursday 1am - US Pacific Daylight Time
The Port Mon MIB review may last up to the full four hours (the MIB
certification
topic is 'as time is available').
Bill Wagner and I are in the US EDT zone.
Mike, Ivan, and Ron are in the US PDT zone.
Harry Lewis would have to set up the US-based IEEE conference bridge and
arrange for a speaker phone in the Epson conference room in Japan.
I would prefer NOT to have this conference call, because it would be a
hardship
for my wife to have me on a headset half the night (and she works early
Thursday
morning).
Cheers,
- Ira
Ira McDonald (Musician / Software Architect)
Blue Roof Music / High North Inc
PO Box 221 Grand Marais, MI 49839
phone: +1-906-494-2434
email: imcdonald at sharplabs.com
-----Original Message-----
From: Mike Fenelon [mailto:mfenelon at windows.microsoft.com]
Sent: Monday, April 11, 2005 6:10 PM
To: McDonald, Ira; Harry Lewis
Subject: RE: PMP> [PMP] Time of Tokyo meeting/conf call??
Sorry all, but I was just there 2 weeks ago for other issues and couldn't
swing going back again for a 2 hr meeting.
I don't have any problem simply calling a number at the meeting room/hotel
at what ever hour needed.. I think.
Thanks,
Mike Fenelon
Microsoft
From: McDonald, Ira [mailto:imcdonald at sharplabs.com]
Sent: Monday, April 11, 2005 2:47 PM
To: Mike Fenelon; pmp at pwg.org
Subject: RE: PMP> [PMP] Time of Tokyo meeting/conf call??
Hi Mike,
There is NOT a plan for any conference call for the Tokyo Port Mon MIB
discussion. The topic is scheduled for the afternoon in Tokyo (middle of
the night in the US). Harry Lewis thought that you were travelling to
Tokyo
for the discussion in person.
Cheers,
- Ira
Ira McDonald (Musician / Software Architect)
Blue Roof Music / High North Inc
PO Box 221 Grand Marais, MI 49839
phone: +1-906-494-2434
email: imcdonald at sharplabs.com
-----Original Message-----
From: pmp-owner at pwg.org [mailto:pmp-owner at pwg.org]On Behalf Of Mike
Fenelon
Sent: Monday, April 11, 2005 12:53 PM
To: pmp at pwg.org
Subject: PMP> [PMP] Time of Tokyo meeting/conf call??
What time (adjusted to the US) is the Tokyo Port Monitor MIB discussion??
I want to call in.
And what will the number be??
Thanks,
Mike Fenelon
Microsoft
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.pwg.org/archives/pmp/attachments/20050412/1368e81d/attachment-0001.html