Smith,
I would ask the same question but I'm wondering what the answer is based on different workflow:
1. Client performs Validate-Job operation first. If the Validate-Job fails (due to fidelity = true), is it illegal for the client to send a Create-Job or Print-Job request anyway?
2. Client does not perform Validate-Job operation, and issues Create-Job or Print-Job directly.
I'm am certainly no expert on all the IPP specs (major understatement), and therefore am wondering if certain workflows are or should be defined?
Thanks,
Chris
Christopher Rizzo
Engineer II, Software Engineering
Design & Development Engineering
[signature_1148357964]<http://www.xerox.com/>
Xerox Corporation
Virtual Office Employee
26600 SW Parkway Ave
Wilsonville, OR 97070
[signature_3741032683]<https://www.linkedin.com/company/xerox/> [signature_745457296] <https://www.youtube.com/user/XeroxCorp> [signature_3162642569] <https://twitter.com/Xerox> [signature_402173805] <https://www.instagram.com/xerox/> [signature_118343443] <https://www.facebook.com/XeroxCorp>
From: ipp <ipp-bounces at pwg.org> on behalf of PWG Workgroup <ipp at pwg.org>
Reply-To: PWG Workgroup <ipp at pwg.org>
Date: Thursday, August 24, 2023 at 9:53 AM
To: PWG Workgroup <ipp at pwg.org>
Cc: "Kennedy, Smith (Wireless & IPP Standards)" <smith.kennedy at hp.com>
Subject: [IPP] "ipp-attribute-fidelity" and media selection
Hi there,
(I should know the answer to this already but it seems I do not.)
If a Printer receives a Job Creation operation that includes "ipp-attribute-fidelity" = 'true' and also specifies "media" = 'na_letter_8.5x11in', but the Printer does not have that specific media size loaded, how is the Printer to respond?
Appendix C of RFC 8011 says "The Client is requesting that the Job be printed exactly as specified, and if that is not possible, then the Job MUST be rejected rather than processed incorrectly."
However, if the specified media size isn't loaded / available at Job Creation time, can the Printer accept the Job if it "promises" to honor the "ipp-attribute-fidelity" = 'true' Job Template attribute by keeping the new Job in the 'pending-held' state until the requested media size is loaded, or otherwise abort the Job? Is this also acceptable for the "ipp-attribute-fidelity" = 'true' case? This is not "rejecting the Job" strictly speaking. An aborted Job would show up in job accounting while a rejected Job Creation operation presumably would not.
Smith
/**
Smith Kennedy
HP Inc.
*/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pwg.org/pipermail/ipp/attachments/20230824/86bbcf7e/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 9065 bytes
Desc: image001.png
URL: <http://www.pwg.org/pipermail/ipp/attachments/20230824/86bbcf7e/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 1409 bytes
Desc: image002.png
URL: <http://www.pwg.org/pipermail/ipp/attachments/20230824/86bbcf7e/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 1427 bytes
Desc: image003.png
URL: <http://www.pwg.org/pipermail/ipp/attachments/20230824/86bbcf7e/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.png
Type: image/png
Size: 1528 bytes
Desc: image004.png
URL: <http://www.pwg.org/pipermail/ipp/attachments/20230824/86bbcf7e/attachment-0003.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image005.png
Type: image/png
Size: 1648 bytes
Desc: image005.png
URL: <http://www.pwg.org/pipermail/ipp/attachments/20230824/86bbcf7e/attachment-0004.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image006.png
Type: image/png
Size: 1456 bytes
Desc: image006.png
URL: <http://www.pwg.org/pipermail/ipp/attachments/20230824/86bbcf7e/attachment-0005.png>
