Chris,
Right now you just run ipptool with the ipp-tests.test file directly, e.g.:
ipptool -d STRICT=1 -tI PRINTER-URI ipp-tests.test
for the interactive output and:
ipptool -d STRICT=1 -P FILENAME.plist -I PRINTER-URI ipp-tests.test
to also create the plist file.
I can look into ways of supporting this with a command-line option, but doing it in Windows .BAT files would be a challenge due to their limited capabilities...
> On May 26, 2020, at 10:46 AM, Rizzo, Christopher <Christopher.Rizzo at xerox.com> wrote:
>> Mike,
>> What is the argument provided to ipp-tests.sh to control whether strict mode or not is being used? I have a feeling it is a bash trick being used, but not being a guru with bash, I cannot tell. Somehow there has to be a way to pass -d STRICT=1 to ipptool inside of ipp-tests.sh, correct?
>> Thanks,
> Chris
>> Christopher Rizzo
> Xerox Corporation
> GDG/Discovery/Advance Technology
> 26600 SW Parkway Ave.
> Wilsonville, OR 97070-9251
> Phone: (585) 314-6936
> Email: Christopher.Rizzo at xerox.com>> "The realization came over me with full force that a good part of the remainder of my life was going to be spent in finding errors in my own programs."
> -Maurice Wilkes, Memoirs of a Computer Pioneer
>> From: ipp <ipp-bounces at pwg.org> on behalf of PWG Workgroup <ipp at pwg.org>
> Reply-To: Michael Sweet <msweet at msweet.org>
> Date: Monday, May 25, 2020 at 7:12 PM
> To: Michael Sweet <msweet at msweet.org>, PWG Self-Certification <ippeveselfcert at pwg.org>
> Cc: PWG Workgroup <ipp at pwg.org>
> Subject: Re: [IPP] [IPP Everywhere Self-Certification] IPP Everywhere v1.1 Printer Self-Certification Tools: Second release candidate posted
>> All,
>> Sorry for the broken links. I also posted another update for the Windows MSI installer package on Friday and now have confirmation that the Windows tools now install and run correctly. Here are the corrected links:
>>https://ftp.pwg.org/pub/pwg/ipp/wd/sw-ippeveselfcert11-20200521-macos.zip>https://ftp.pwg.org/pub/pwg/ipp/wd/sw-ippeveselfcert11-20200521-rhel.tar.gz>https://ftp.pwg.org/pub/pwg/ipp/wd/sw-ippeveselfcert11-20200521-ubuntu.tar.gz>https://ftp.pwg.org/pub/pwg/ipp/wd/sw-ippeveselfcert11-20200522-windows.msi>>>> On May 21, 2020, at 5:33 PM, Michael Sweet via ippeveselfcert <ippeveselfcert at pwg.org> wrote:
>>>> All,
>>>> I have posted a second release candidate of the IPP Everywhere v1.1 Printer Self-Certifications Tools to:
>>>>https://ftp.pwg.org/pub/pwg/ipp/wd/sw-ippeveselfcert11-macos.zip>>https://ftp.pwg.org/pub/pwg/ipp/wd/sw-ippeveselfcert11-rhel.tar.gz>>https://ftp.pwg.org/pub/pwg/ipp/wd/sw-ippeveselfcert11-ubuntu.tar.gz>>https://ftp.pwg.org/pub/pwg/ipp/wd/sw-ippeveselfcert11-windows.msi>>>> These release candidates fix the following issues:
>>>> - Issue #47: Test for finishings support should define HAVE_FINISHINGS if "finishings-supported" has value other than 3 (none)
>> - Issue #48: HAVE_IDENTIFY_PRINTER isn't defined prior to test I-9 that uses it
>> - Issue #50: Relax Get-Printer-Attributes tests
>> - Issue #51: Add "strict" mode for Get-Printer-Attributes tests
>>>> Please test these tools prior to the next IPP workgroup meeting on June 4, 2020 at 3pm ET so that we can approve both the tools and the new specifications.
>>>> Thank you!
>>>> ________________________
>> Michael Sweet
>>>>>>>> _______________________________________________
>> ippeveselfcert mailing list
>>ippeveselfcert at pwg.org>>https://www.pwg.org/mailman/listinfo/ippeveselfcert>>>> ________________________
> Michael Sweet
>>>> _______________________________________________
> ipp mailing list
>ipp at pwg.org>https://www.pwg.org/mailman/listinfo/ipp
________________________
Michael Sweet