We don't need any more alternatives. We need to close this NOW!
**********************************************
* Don Wright don at lexmark.com *
* Chair, Printer Working Group *
* Chair, IEEE MSC *
* *
* Director, Alliances and Standards *
* Lexmark International *
* 740 New Circle Rd C14/082-3 *
* Lexington, Ky 40550 *
* 859-825-4808 (phone) 603-963-8352 (fax) *
**********************************************
"Hastings, Tom N" <hastings%cp10.es.xerox.com at interlock.lexmark.com> on
05/01/2001 02:46:58 PM
To: "ipp (E-mail)" <ipp%pwg.org at interlock.lexmark.com>
cc: "UPDF WG (E-mail)" <upd%pwg.org at interlock.lexmark.com>, "UPnP Print and
Imaging WG <IMAGING at FORUM. UPNP. ORG> (E-mail)"
<IMAGING%FORUM.UPNP.ORG at interlock.lexmark.com>, "Melinda Grant (E-mail)"
<melinda_grant%hp.com at interlock.lexmark.com> (bcc: Don Wright/Lex/Lexmark)
Subject: IPP> MED - telecon to decide on PWG Media Size syntax, Wed, May 2, 10-
12 PDT (1-3 EDT)
Sorry for the posting to the many lists, but Ron and I as editors of the PWG
Media Standardized Names standard want to reach consensus on the syntax for
the dimensions at the telecon tommorrow, Wednesday, May 2.
At last week's UPnP Imaging WG meeting in Portland it was agreed to use the
PWG Media Standardized Names standard for additional value of the MediaType
and MediaSize parameters of the CreateJob action, so we need to finish the
PWG Media standard.
Since there has not been a clear consensus on any method at the PWG Media
meeting last week in Portland and all of the methods have not been
considered together at the same time (in Portland, we only considered
methods b and c below), we'd like to list the alternatives and see if we can
reach consensus. The following syntaxes have been considered or proposed
over time in the following order for the Media Size Self Describing Name:
a. original UPnP/HTML way (but with _ field separator): iso-a4_210x297mm,
na-letter_8.5x11in
b. Maui (D03-D07) way: iso-a4.2100-2970, na-letter.8500-11000
c. Portland decision: iso_a4_210-297, na_letter_8.5-11
d. All 1000ths of mm: iso-a4.210000-297000, na-letter.215900-279400
e. Units as a separate third field: iso-a4_210-297_mm, na-letter_8.5-11_in
Are there any other alternatives that we should add to the list?
If you cannot attend the telecon, please send your rankings of these five
methods to the ipp mailing list (see To: field above which is: ipp at pwg.org),
in order not to flood people's email. In addition to ranking, please
indicate any methods that you feel strongly in favor of or strongly against
as well.
Here are the telecon details:
Time: May 2, 2001 10:00 - 12:00 PST (1:00 - 3:00 EST)
Phone: 1-712-271-0309 (8*534-8273 for Xerox folks)
Passcode: 98099#
If you want to read the details of the PWG meeting last week on the PWG
Media Standardized Names standard, see:
ftp://ftp.pwg.org/pub/pwg/media-sizes/media-name-minutes-010424.docftp://ftp.pwg.org/pub/pwg/media-sizes/media-name-minutes-010424.pdf
Tom and Ron
-----Original Message-----
From: Manros, Carl-Uno B [mailto:cmanros at cp10.es.xerox.com]
Sent: Monday, April 30, 2001 14:36
To: 'IETF-IPP'
Subject: IPP> ADM - IPP Phone Conference on Wednesday, May 2.
All,
We will hold our next IPP Phone Conference on Wednesday, May 2.
Main agenda points is to inform about the outcome of the PWG meeting last
week.
This means that we will review and continue discussion of the Media
document, see input to PWG meeting last week plus minutes distributed by Tom
Hastings last Friday.
We will also review what happened in the IPP Fax meeting.
Here is the dial-in information:
Time: May 2, 2001 10:00 - 12:00 PST (1:00 - 3:00 EST)
Phone: 1-712-271-0309 (8*534-8273 for Xerox folks)
Passcode: 98099#
Carl-Uno
Carl-Uno Manros
Manager, Print Services
Xerox Architecture Center - Xerox Corporation
701 S. Aviation Blvd., El Segundo, CA, M/S: ESAE-231
Phone +1-310-333 8273, Fax +1-310-333 5514
Email: manros at cp10.es.xerox.com