From wamwagner at comcast.net Tue Mar 14 16:23:28 2017 From: wamwagner at comcast.net (wamwagner at comcast.net) Date: Tue, 14 Mar 2017 12:23:28 -0400 Subject: [SM3] JDFMAP Message-ID: <20170314162335.EB95D2887@www.pwg.org> The Mapping CIP4 JDF to PWG PJT (JDFMAP) specification has been in Prototype state waiting for notice of prototype since June 2015. With the hibernation of the SM workgroup, it is desirable that this substantive work not be lost. It was agreed at the February face-to-face that this specification should be put up as a Best Practices informational PWG document. Looking at Process 3.0, it states that Best Practice publications are? formal Working Group documents that undergo naming, Last Call and Formal Approval just like a Working Draft?. While the meaning of this may not be as clear as one might like, I take this to mean that the document: ? Be identified as a Best Practices candidate ? Be put at a Stable level (after some review and update---I expect that some of the reference, at least, must be revised) ? Be presented to the PWG membership for Last Call ? Last Call comment be addressed and resolved ? The document be put to PWG vote If there is agreement on this, I would ask Ira and Rick ti take a quick look to see what may need updating. The current version is at http://ftp.pwg.org/pub/pwg/sm3/wd/wd-smjdfmap10-20150604.pdf. We then may call a brief SM conference, perhaps for 23 March, to get working group approval and to initiate Last Call. Thanks, Bill Wagner Sent from Mail for Windows 10 From msweet at apple.com Tue Mar 14 16:54:12 2017 From: msweet at apple.com (Michael Sweet) Date: Tue, 14 Mar 2017 12:54:12 -0400 Subject: [SM3] JDFMAP In-Reply-To: <20170314162335.EB95D2887@www.pwg.org> References: <20170314162335.EB95D2887@www.pwg.org> Message-ID: Bill, Yes, that is the correct process for an informational document. > On Mar 14, 2017, at 12:23 PM, wamwagner at comcast.net wrote: > > The Mapping CIP4 JDF to PWG PJT (JDFMAP) specification has been in Prototype state waiting for notice of prototype since June 2015. With the hibernation of the SM workgroup, it is desirable that this substantive work not be lost. It was agreed at the February face-to-face that this specification should be put up as a Best Practices informational PWG document. > > Looking at Process 3.0, it states that Best Practice publications are? formal Working Group documents that undergo naming, Last Call and Formal Approval just like a Working Draft?. While the meaning of this may not be as clear as one might like, I take this to mean that the document: > ? Be identified as a Best Practices candidate > ? Be put at a Stable level (after some review and update---I expect that some of the reference, at least, must be revised) > ? Be presented to the PWG membership for Last Call > ? Last Call comment be addressed and resolved > ? The document be put to PWG vote > > If there is agreement on this, I would ask Ira and Rick ti take a quick look to see what may need updating. The current version is at http://ftp.pwg.org/pub/pwg/sm3/wd/wd-smjdfmap10-20150604.pdf. We then may call a brief SM conference, perhaps for 23 March, to get working group approval and to initiate Last Call. > > Thanks, > Bill Wagner > > > Sent from Mail for Windows 10 > > _______________________________________________ > sm3 mailing list > sm3 at pwg.org > https://www.pwg.org/mailman/listinfo/sm3 _________________________________________________________ Michael Sweet, Senior Printing System Engineer From blueroofmusic at gmail.com Tue Mar 14 17:12:31 2017 From: blueroofmusic at gmail.com (Ira McDonald) Date: Tue, 14 Mar 2017 13:12:31 -0400 Subject: [SM3] JDFMAP In-Reply-To: References: <20170314162335.EB95D2887@www.pwg.org> Message-ID: Hi Bill and Mike, Agreed - that's the right process. I'll take a look at the spec draft for obvious update work (references, style of conformance statements, etc.) and try to assess the time needed. Not sure if I'll have answers by March 23 (Nancy will be out-of-town at an EMS conference, so I'll be extra busy), but I'll have answers soon. Cheers, - Ira Ira McDonald (Musician / Software Architect) Co-Chair - TCG Trusted Mobility Solutions WG Chair - Linux Foundation Open Printing WG Secretary - IEEE-ISTO Printer Working Group Co-Chair - IEEE-ISTO PWG Internet Printing Protocol WG IETF Designated Expert - IPP & Printer MIB Blue Roof Music / High North Inc http://sites.google.com/site/blueroofmusic http://sites.google.com/site/highnorthinc mailto: blueroofmusic at gmail.com Jan-April: 579 Park Place Saline, MI 48176 734-944-0094 May-Dec: PO Box 221 Grand Marais, MI 49839 906-494-2434 On Tue, Mar 14, 2017 at 12:54 PM, Michael Sweet wrote: > Bill, > > Yes, that is the correct process for an informational document. > > > > On Mar 14, 2017, at 12:23 PM, wamwagner at comcast.net wrote: > > > > The Mapping CIP4 JDF to PWG PJT (JDFMAP) specification has been in > Prototype state waiting for notice of prototype since June 2015. With the > hibernation of the SM workgroup, it is desirable that this substantive work > not be lost. It was agreed at the February face-to-face that this > specification should be put up as a Best Practices informational PWG > document. > > > > Looking at Process 3.0, it states that Best Practice publications are? > formal Working Group documents that undergo naming, Last Call and Formal > Approval just like a Working Draft?. While the meaning of this may not be > as clear as one might like, I take this to mean that the document: > > ? Be identified as a Best Practices candidate > > ? Be put at a Stable level (after some review and update---I expect that > some of the reference, at least, must be revised) > > ? Be presented to the PWG membership for Last Call > > ? Last Call comment be addressed and resolved > > ? The document be put to PWG vote > > > > If there is agreement on this, I would ask Ira and Rick ti take a quick > look to see what may need updating. The current version is at > http://ftp.pwg.org/pub/pwg/sm3/wd/wd-smjdfmap10-20150604.pdf. We then > may call a brief SM conference, perhaps for 23 March, to get working group > approval and to initiate Last Call. > > > > Thanks, > > Bill Wagner > > > > > > Sent from Mail for Windows 10 > > > > _______________________________________________ > > sm3 mailing list > > sm3 at pwg.org > > https://www.pwg.org/mailman/listinfo/sm3 > > _________________________________________________________ > Michael Sweet, Senior Printing System Engineer > > _______________________________________________ > sm3 mailing list > sm3 at pwg.org > https://www.pwg.org/mailman/listinfo/sm3 > From msweet at apple.com Mon Mar 27 20:16:29 2017 From: msweet at apple.com (Michael Sweet) Date: Mon, 27 Mar 2017 16:16:29 -0400 Subject: [SM3] Updated PWG 3D Print Job Ticket and Associated Capabilities v1.0 (PJT3D) posted Message-ID: <65862676-49FB-407F-A20E-2F8BD21D3C9F@apple.com> All, I have posted an updated interim draft of the PWG 3D Print Job Ticket and Associated Capabilities v1.0 (PJT3D) document to: http://ftp.pwg.org/pub/pwg/ipp/wd/wd-smpjt3d10-20170327.docx http://ftp.pwg.org/pub/pwg/ipp/wd/wd-smpjt3d10-20170327.pdf http://ftp.pwg.org/pub/pwg/ipp/wd/wd-smpjt3d10-20170327-rev.pdf The updated schema is available here: http://ftp.pwg.org/pub/pwg/sm3/schemas/smpjt3d10-20170327.zip http://istopwg.github.io/ippregistry/smpjt3d10-current (browseable version) _________________________________________________________ Michael Sweet, Senior Printing System Engineer From msweet at apple.com Tue Mar 28 14:00:48 2017 From: msweet at apple.com (Michael Sweet) Date: Tue, 28 Mar 2017 10:00:48 -0400 Subject: [SM3] [3D Printing] Updated PWG 3D Print Job Ticket and Associated Capabilities v1.0 (PJT3D) posted In-Reply-To: <1490708666.12180.13.camel@localhost> References: <65862676-49FB-407F-A20E-2F8BD21D3C9F@apple.com> <1490708666.12180.13.camel@localhost> Message-ID: <5A05C651-A83B-4CE9-AB3F-13740D179F25@apple.com> Try: http://istopwg.github.io/ippregistry/smpjt10-current/Print3DService.html (I think I need to add a redirect index.html page...) > On Mar 28, 2017, at 9:44 AM, o.schinagl at ultimaker.com wrote: > > Hey Michael, > > On Mon, 2017-03-27 at 16:16 -0400, Michael Sweet wrote: >> All, >> >> I have posted an updated interim draft of the PWG 3D Print Job Ticket >> and Associated Capabilities v1.0 (PJT3D) document to: >> >> http://ftp.pwg.org/pub/pwg/ipp/wd/wd-smpjt3d10-20170327.docx >> http://ftp.pwg.org/pub/pwg/ipp/wd/wd-smpjt3d10-20170327.pdf >> http://ftp.pwg.org/pub/pwg/ipp/wd/wd-smpjt3d10-20170327-rev.pdf >> >> The updated schema is available here: >> >> http://ftp.pwg.org/pub/pwg/sm3/schemas/smpjt3d10-20170327.zip >> http://istopwg.github.io/ippregistry/smpjt3d10-current > > the gihub.io page yields: > > 404 > > File not found > > permission problem maybe? >> (browseable version) >> >> _________________________________________________________ >> Michael Sweet, Senior Printing System Engineer >> >> _______________________________________________ >> 3d-printing mailing list >> 3d-printing at pwg.org >> https://www.pwg.org/mailman/listinfo/3d-printing _________________________________________________________ Michael Sweet, Senior Printing System Engineer From msweet at apple.com Tue Mar 28 14:17:48 2017 From: msweet at apple.com (Michael Sweet) Date: Tue, 28 Mar 2017 10:17:48 -0400 Subject: [SM3] [3D Printing] Updated PWG 3D Print Job Ticket and Associated Capabilities v1.0 (PJT3D) posted In-Reply-To: <1490708666.12180.13.camel@localhost> References: <65862676-49FB-407F-A20E-2F8BD21D3C9F@apple.com> <1490708666.12180.13.camel@localhost> Message-ID: And I've just pushed the proper changes so the directory name matches the document name, so the original Github link will now work: https://istopwg.github.io/ippregistry/smpjt3d10-current > On Mar 28, 2017, at 9:44 AM, o.schinagl at ultimaker.com wrote: > > Hey Michael, > > On Mon, 2017-03-27 at 16:16 -0400, Michael Sweet wrote: >> All, >> >> I have posted an updated interim draft of the PWG 3D Print Job Ticket >> and Associated Capabilities v1.0 (PJT3D) document to: >> >> http://ftp.pwg.org/pub/pwg/ipp/wd/wd-smpjt3d10-20170327.docx >> http://ftp.pwg.org/pub/pwg/ipp/wd/wd-smpjt3d10-20170327.pdf >> http://ftp.pwg.org/pub/pwg/ipp/wd/wd-smpjt3d10-20170327-rev.pdf >> >> The updated schema is available here: >> >> http://ftp.pwg.org/pub/pwg/sm3/schemas/smpjt3d10-20170327.zip >> http://istopwg.github.io/ippregistry/smpjt3d10-current > > the gihub.io page yields: > > 404 > > File not found > > permission problem maybe? >> (browseable version) >> >> _________________________________________________________ >> Michael Sweet, Senior Printing System Engineer >> >> _______________________________________________ >> 3d-printing mailing list >> 3d-printing at pwg.org >> https://www.pwg.org/mailman/listinfo/3d-printing _________________________________________________________ Michael Sweet, Senior Printing System Engineer